Wire and Cable Management

Showing 49 - 96 of 473 Items
Filters Clear Filters
expand_less Brand (3)
+ Show 60 More
expand_less Ways to Shop
expand_less Material
  • Ideal
  • Kopex-Ex
  • nVent CADDY
Ideal
IDEAL, Ring Terminal, Vinyl Ring, Cable Size: 12 - 10 AWG, Number Of Holes: 1, Stud Size: 1/4 IN, Material: Tin Plated Brass, Insulation: Vinyl Insulated
MFR: Ideal Industries
MFR #: 83-2351
UPC: 783250489886
Item #: 30912
In Stock -
$0.81 each
Availability
Location Available Qty
nVent CADDY
SK Single Piece Strut Clamp for Conduit, Steel, EG, 2" EMT, 2" Rigid/Pipe
MFR: nVent
MFR #: SK325I
UPC: 782856253419
Item #: 120630
In Stock -
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Ideal
IDEAL, Cable Staple, Cable Type: ROMEX, Non-Metallic And Underground Feeder Cable, Staple Size: 1/2 IN, Material: Smooth Plastic, Color: White, Insulation: Insulated, Finish: Zinc-Plated Nails, Nail Type: Standard
MFR: Ideal Industries
MFR #: BPS2-50
UPC: 783250580927
Item #: 127259
In Stock -
$4.36 each
Availability
Location Available Qty
Ideal
Duct Seal, Dark Gray Putty, Size: 5 LB Block, Specific Gravity: 1.65, Base Content: Butyl Rubber Composite
MFR: Ideal Industries
MFR #: 31-605
UPC: 783250316052
Item #: 34135
In Stock -
$22.92 each
Availability
Location Available Qty
Ideal
IDEAL, Ring Terminal, Vinyl Ring, Cable Size: 12 - 10 AWG, Number Of Holes: 1, Stud Size: 10 IN, Material: Tin Plated Brass, Insulation: Vinyl Insulated
MFR: Ideal Industries
MFR #: 83-2341
UPC: 783250489879
Item #: 30262
In Stock -
$0.63 each
Availability
Location Available Qty
nVent CADDY
SCH2 Single Piece Strut Clamp for Cable/Conduit, 2.38"2.88" OD, 2 1/2" EMT
MFR: nVent
MFR #: SCH48B
UPC: 782856252481
Item #: 130035
Available to Order
$10.72 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 16 - 14 AWG, Stud Size: 10 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7171
UPC: 783250490172
Item #: 52975
In Stock -
$0.55 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Thin-Wall, Shrink Ratio: 2:1, Inside Diameter: 1/2 IN, Thickness: 026 IN, Length: 4 FT, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Dielectric Strength: ASTM D 150, 20 KV/MM, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: UL 224, No Cracking (250 DEG C/4 HR), Cable Range: 4 - 1 AWG, Nominal Recoveredi.d. (max.): 0.252 IN, Expanded I.d. (min.): 0.539, Elongation At Break: 600 PCT ASTM D 638, Elongation Of Break After Aging: 350 PCT For UL 224 Test Method, Cold Bend Test (-55c/4 Hours): No Cracking For UL 224 Test Method, Copper Corrosion: Pass For UL 224 Test Method, Chemical Resistance: Pass For UL 224 Test Method, Longitudinal Shrinkage: 0 Plus Or Minus 5 PCT For UL 224 Test Method, Eccentricity: 30 PCT For UL 224 Test Method, Normal Size: 1/2 IN, Package: Disk
MFR: Ideal Industries
MFR #: 46-608
UPC: 783250466085
Item #: 49979
In Stock -
$25.66 each
Availability
Location Available Qty
nVent CADDY
Single Piece Strut Clamp for Conduit, 0.72"1.16" OD, 1" EMT, 3/4" Rigid/Pipe
MFR: nVent
MFR #: SCH16
UPC: 782856252160
Item #: 3329
In Stock -
$4.35 each
Availability
Location Available Qty
nVent CADDY
Push In Conduit Clamp, 3/4" EMT, 0.866"1.181" OD, 9/32" Hole, Plain
MFR: nVent
MFR #: 12P
UPC: 782856702627
Item #: 174320
In Stock -
$1.52 each
Availability
Location Available Qty
Ideal
IDEAL, Ring Terminal, Vinyl Ring, Cable Size: 12 - 10 AWG, Stud Size: 8 IN, Number Of Holes: 1, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-2331
UPC: 783250489862
Item #: 146500
In Stock -
$0.63 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.160 IN, Length: 9 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 4/0 AWG - 400 MCM, Nominal Recoveredi.d. (max.): 0.470 IN, Expanded I.d. (min.): 1.500, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-1500
MFR: Ideal Industries
MFR #: 46-356
UPC: 783250463565
Item #: 180871
In Stock -
$21.86 each
Availability
Location Available Qty
nVent CADDY
Single Piece Strut Clamp for Conduit, Steel, EG, 3/4" EMT, 3/4" Rigid/Pipe
MFR: nVent
MFR #: SK125I
UPC: 782856253372
Item #: 55925
Available to Order
$4.25 each
Availability
Location Available Qty
nVent CADDY
Single Piece Strut Clamp for Cable/Conduit, 2.72"3.5" OD, 3" EMT 3" Rigid
MFR: nVent
MFR #: SCH56B
UPC: 782856252566
Item #: 11321
Available to Order
$13.65 each
Availability
Location Available Qty
Ideal
IDEAL, Mounting Pad, Mount Size: 0.990 IN Width X 0.200 IN Height, Material: Nylon, Color: Natural, Slot Height: 060 IN, Slot Width: 0.200 IN, Screw Diameter: #6
MFR: Ideal Industries
MFR #: IT1000MP-C
UPC: 783250575169
Item #: 184191
In Stock -
$0.63 each
Availability
Location Available Qty
nVent CADDY
Single Piece Strut Clamp for Cable/Conduit, 3.85"4.5" OD, 4" EMT 4" Rigid
MFR: nVent
MFR #: SCH72B
UPC: 782856252726
Item #: 11957
In Stock -
$18.95 each
Availability
Location Available Qty
nVent CADDY
Push In Conduit Clamp, 1/2" EMT, 0.709"0.866" OD, 9/32" Hole, Plain
MFR: nVent
MFR #: 8P
UPC: 782856702580
Item #: 173616
In Stock -
$1.37 each
Availability
Location Available Qty
nVent CADDY
Bolt Close Conduit/Pipe Clamp, Steel, 4" EMT, 4" Rigid/Pipe, 0.313" Hole
MFR: nVent
MFR #: CD9B
UPC: 782856120094
Item #: 128261
In Stock -
$9.81 each
Availability
Location Available Qty
Ideal
IDEAL, Clamp, Staple Size: 3/8 IN Width X 050 IN Thickness X 0.250 IN Closed Diameter, Material: Nylon, Color: Natural, Mounting: 0.203 IN Hole X 0.421 IN Center To Center
MFR: Ideal Industries
MFR #: IT250CCL-C
UPC: 783250586301
Item #: 57195
Available to Order
$0.14 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 0.120 IN, Length: 48 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 1 - 3/0 AWG, Nominal Recoveredi.d. (max.): 0.350 IN, Expanded I.d. (min.): 1.100, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-1100
MFR: Ideal Industries
MFR #: 46-354
UPC: 783250463541
Item #: 108401
In Stock -
$52.98 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 16 - 14 AWG, Stud Size: 6 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7151
UPC: 783250490158
Item #: 49170
In Stock -
$0.55 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 12 - 10 AWG, Stud Size: 1/4 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7231
UPC: 783250490257
Item #: 49939
In Stock -
$0.68 each
Availability
Location Available Qty
Ideal
IDEAL, Ring Terminal, Vinyl Ring, Cable Size: 16 - 14 AWG, Stud Size: 10 IN, Number Of Holes: 1, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-2241
UPC: 783250489831
Item #: 23922
In Stock -
$0.49 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Thin-Wall, Shrink Ratio: 2:1, Inside Diameter: 3/4 IN, Thickness: 027 IN, Length: 4 FT, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Dielectric Strength: ASTM D 150, 20 KV/MM, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: UL 224, No Cracking (250 DEG C/4 HR), Cable Range: 2 AWG - 250 KCMIL, Nominal Recoveredi.d. (max.): 0.374 IN, Expanded I.d. (min.): 0.807, Elongation At Break: 600 PCT ASTM D 638, Cold Bend Test (-55c/4 Hours): No Cracking For UL 224 Test Method, Elongation Of Break After Aging: 350 PCT For UL 224 Test Method, Copper Corrosion: Pass For UL 224 Test Method, Chemical Resistance: Pass For UL 224 Test Method, Longitudinal Shrinkage: 0 Plus Or Minus 5 PCT For UL 224 Test Method, Eccentricity: 30 PCT For UL 224 Test Method, Normal Size: 3/4 IN, Package: Disk
MFR: Ideal Industries
MFR #: 46-609
UPC: 783250466092
Item #: 4163
In Stock -
$32.26 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 6 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 6 - 1 AWG, Nominal Recoveredi.d. (max.): 0.240 IN, Expanded I.d. (min.): 0.750, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-750
MFR: Ideal Industries
MFR #: 46-347
UPC: 783250463473
Item #: 64060
Available to Order
$12.04 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 060 IN, Length: 9 IN, Dielectric Strength: 500 V/MIL (20 KV MINT), Volume Resistivity: 1013 OHM -CM MIN, Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 8 - 6 AWG, Nominal Recoveredi.d. (max.): 0.150 IN, Expanded I.d. (min.): 0.400, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-400
MFR: Ideal Industries
MFR #: 46-344
UPC: 783250463442
Item #: 14694
In Stock -
$14.11 each
Availability
Location Available Qty
nVent CADDY
Single Piece Strut Clamp for Conduit, Steel, EG, 1" EMT, 1" Rigid/Pipe
MFR: nVent
MFR #: SK165I
UPC: 782856253389
Item #: 122734
Available to Order
$4.46 each
Availability
Location Available Qty
Ideal
IDEAL, Cable Tie, Powr-Tie, Standard, Plenum, Length: 7.500 IN, Width: 0.178 IN, Thickness: 053 IN, Bundle Diameter: 1/16 To 1-7/8 IN, Material: Nylon, Color: Natural, Tensile Strength: 50 LB
MFR: Ideal Industries
MFR #: IT2S-C
UPC: 783250574391
Item #: 112688
Available to Order
$0.13 each
Availability
Location Available Qty
nVent CADDY
H-PSM Conduit to Flange Clip, Side Mount, 1 EMT, 1.1811.378 OD, 0.1250.25 Flange
MFR: nVent
MFR #: 16P24SM
UPC: 782856112662
Item #: 108188
In Stock -
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Thin-Wall, Shrink Ratio: 2:1, Inside Diameter: 3/16 IN, Thickness: 020 IN, Length: 4 FT, Dielectric Strength: ASTM D 150, 20 KV/MM, Volume Resistivity: 1014 OHM CM For ASTM D 876 Test Method, Continuous Operating Temperature: -55 To 125 DEG C, Minimum Shrink Temperature: 70 DEG C, Heat Shock: UL 224, No Cracking (250 DEG C/4 HR), Cable Range: 20 - 14 AWG, Nominal Recoveredi.d. (max.): 094 IN, Expanded I.d. (min.): 0.205, Elongation At Break: 600 PCT ASTM D 638, Elongation Of Break After Aging: 350 PCT For UL 224 Test Method, Cold Bend Test (-55c/4 Hours): No Cracking For UL 224 Test Method, Copper Corrosion: Pass For UL 224 Test Method, Chemical Resistance: Pass For UL 224 Test Method, Longitudinal Shrinkage: 0 Plus Or Minus 5 PCT For UL 224 Test Method, Eccentricity: 30 PCT For UL 224 Test Method, Normal Size: 3/16 IN, Package: Disk
MFR: Ideal Industries
MFR #: 46-604
UPC: 783250466047
Item #: 164037
In Stock -
$22.18 each
Availability
Location Available Qty
nVent CADDY
H-MSM Conduit/Pipe to Flange Clip, Side Mount, Spring Steel, 3/4, 1 EMT, 5/161/2 Flange
MFR: nVent
MFR #: 16M58SM
UPC: 782856122166
Item #: 100229
Available to Order
$5.28 each
Availability
Location Available Qty
nVent CADDY
SCH2 Single Piece Strut Clamp for Cable/Conduit, 2"2.38" OD
MFR: nVent
MFR #: SCH40B
UPC: 782856252405
Item #: 134541
Available to Order
$9.38 each
Availability
Location Available Qty
nVent CADDY
Cable Snap Clip, 1/16"3/16" Flange, 0.472"0.551" OD
MFR: nVent
MFR #: SC2D
UPC: 782856798064
Item #: 73056
In Stock -
$1.72 each
Availability
Location Available Qty
nVent CADDY
Push In Conduit to Conduit Clamp, 3/4" EMT1, 3/4" EMT2, 1/2" Rigid1, 1/2" Rigid2, 0.866"1.18" OD1, 0.866"1.18" OD2
MFR: nVent
MFR #: 12P12P
UPC: 782856812623
Item #: 95596
Available to Order
$4.07 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 12 - 10 AWG, Stud Size: 6 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7201
UPC: 783250490189
Item #: 72476
In Stock -
$0.68 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Snap Spade, Cable Size: 16 - 14 AWG, Stud Size: 10 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7071
UPC: 783250490080
Item #: 137260
Available to Order
$0.55 each
Availability
Location Available Qty
nVent CADDY
H-MSM Conduit/Pipe to Flange Clip, Side Mount, Spring Steel, 1 1/4 EMT, 1/81/4 Flange
MFR: nVent
MFR #: 20M24SM
UPC: 782856112204
Item #: 139146
In Stock -
$6.17 each
Availability
Location Available Qty
nVent CADDY
MC/AC Cable to Flange Clip, Side Mount, 1/8"1/4" Flange, 14-2 to 10-3 MC/AC
MFR: nVent
MFR #: MAC224SM
UPC: 782856330691
Item #: 63620
In Stock -
$4.46 each
Availability
Location Available Qty
nVent CADDY
Conduit to Flange Clip Side Mount 3/4 EMT, 0.1250.25 Flange
MFR: nVent
MFR #: 12P24SM
UPC: 782856112624
Item #: 106189
In Stock -
$4.33 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 22 - 18 AWG, Stud Size: 8 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7121
UPC: 783250490134
Item #: 39944
In Stock -
$0.55 each
Availability
Location Available Qty
Ideal
IDEAL, Ring Terminal, Vinyl Ring, Cable Size: 12 - 10 AWG, Number Of Holes: 1, Stud Size: 5/16 IN, Material: Tin Plated Brass, Insulation: Vinyl Insulated
MFR: Ideal Industries
MFR #: 83-2361
UPC: 783250489893
Item #: 159180
In Stock -
$0.82 each
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Snap Spade, Cable Size: 16 - 14 AWG, Stud Size: 8 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7061
UPC: 783250490073
Item #: 82845
In Stock -
$0.55 each
Availability
Location Available Qty
nVent CADDY
SK Single Piece Strut Clamp for Conduit, Steel, EG, 1 1/4" EMT, 1 1/4" Rigid/Pipe
MFR: nVent
MFR #: SK205I
UPC: 782856253396
Item #: 122070
Available to Order
$4.68 each
Availability
Location Available Qty
nVent CADDY
Bolt Close Conduit/Pipe Clamp, Steel, 3 1/2" EMT, 3 1/2" Rigid/Pipe, 0.313" Hole
MFR: nVent
MFR #: CD8B
UPC: 782856120087
Item #: 128922
In Stock -
$8.23 each
Availability
Location Available Qty
nVent CADDY
SK Single Piece Strut Clamp for Conduit, Steel, EG, 1/2" EMT, 1/2" Rigid/Pipe
MFR: nVent
MFR #: SK85I
UPC: 782856253365
Item #: 123442
Available to Order
$4.08 each
Availability
Location Available Qty
nVent CADDY
SK Single Piece Strut Clamp for Conduit, Steel, EG, 1 1/2" EMT, 1 1/2" Rigid/Pipe
MFR: nVent
MFR #: SK245I
UPC: 782856253402
Item #: 121358
In Stock -
Phone: 1-855-999-2372 Email Contact Us
Availability
Location Available Qty
Ideal
IDEAL, Spade Terminal, Vinyl Spade, Cable Size: 22 - 18 AWG, Stud Size: 6 IN, Insulation: Vinyl Insulated, Material: Tin Plated Brass
MFR: Ideal Industries
MFR #: 83-7111
UPC: 783250490127
Item #: 88685
In Stock -
$0.55 each
Availability
Location Available Qty
Ideal
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Heavy-Wall Heat Shrink Tubing, Shrink Ratio: 3:1, Thickness: 090 IN, Length: 48 IN, Volume Resistivity: 1013 OHM -CM MIN, Dielectric Strength: 500 V/MIL (20 KV MINT), Continuous Operating Temperature: -55 To 110 DEG C, Minimum Shrink Temperature: 120 - 250 DEG C (200 DEG C Recommended), Low Temperature Flexibility: -55 DEG C, Heat Shock: No Cracks, Flowing Or Dripping (4 HR At 225 DEG C), Water Absorption: 0.5 PCT, Heat Aging: 500 PCT (168 HR At 175 DEG C Tensile Strength Elongation), Cable Range: 6 - 2 AWG, Nominal Recoveredi.d. (max.): 0.240 IN, Expanded I.d. (min.): 0.750, Copper Corrosion: Non-Corrosive, Ultimate Elongation: 600 PCT Min., Model: TS-46-750
MFR: Ideal Industries
MFR #: 46-350
UPC: 783250463503
Item #: 146543
Available to Order
$44.95 each
Availability
Location Available Qty