Skip to Main Content Skip to Footer Content

Main Content Starts Here

Anchors

filter_alt Filters

Showing 1 - 48 of 211 Items

Sort By

Per Page

Top Seller

LH DOTTIE

Hex Head Concrete Anchor System, 1/4 in. diameter, 1-1/4 in. length, Hi-Low thread type, 3/16 x 3-1/2 in. drill size, Ceramic Coated Blue finish, Drill included, 5/16 in. bit size, Slotted drive type

14H114 Concrete Anchoring Screw, 1/4 inch x 1-1/4 inch, Hex/Slotted Head Drive, Galvanized Steel

MFR: LH Dottie

MFR #: 14H114

UPC: 781002252085

Item #: 90068

LH DOTTIE

Hex Head Concrete Anchor System, 1/4 in. diameter, 1-3/4 in. length, Hi-Low thread type, 3/16 x 3-1/2 in. drill size, Ceramic Coated Blue finish, Drill included, 5/16 in. bit size, Slotted drive type

14H134 4560 Concrete Anchoring Screw, 1/4 in Dia, 1-3/4 in OAL, Hex/Slotted Head Drive, Galvanized Steel

MFR: LH Dottie

MFR #: 14H134

UPC: 781002252887

Item #: 12205

LH DOTTIE

Hex Head Concrete Anchor System, 1/4 in. diameter, 2-1/4 in. length, Hi-Low thread type, 3/16 x 4-1/2 in. drill size, Ceramic Coated Blue finish, Drill included, 5/16 in. bit size, Slotted drive type

14H214 4560 Concrete Anchoring Screw, 1/4 in Dia, 2-1/4 in OAL, Hex/Slotted Head Drive, Galvanized Steel

MFR: LH Dottie

MFR #: 14H214

UPC: 781002253686

Item #: 175601

LH DOTTIE

Drop in Anchor, 1-9/16 in. length, 1-9/16 in. minimum embedment depth, 3/8-16 in. thread size, 16 thread per inch, 1/2 in. drill size, Steel material, Zinc Plated Finish

DA38 4500 Drop-In Anchor, Steel, 1/2 in Drill, 1-9/16 in D Min Embedment

MFR: LH Dottie

MFR #: DA38

UPC: 781002276050

Item #: 3111

LH DOTTIE

Drop in Anchor, 1 in. length, 1 in. minimum embedment depth, 1/4-20 in. thread size, 20 thread per inch, 3/8 in. drill size, Steel material, Zinc Plated Finish

DA25 4500 Drop-In Anchor, Steel, 3/8 in Drill, 1 in D Min Embedment

MFR: LH Dottie

MFR #: DA25

UPC: 781002276005

Item #: 2450

LH DOTTIE

Machine Screw Anchor, 1/4 in. Size, 1/2 in. drill size, Lead material

MA5 Medium Duty Machine Screw Anchor, 1/4 in Dia, Lead

MFR: LH Dottie

MFR #: MA5

UPC: 781002299257

Item #: 10824

LH DOTTIE

Full Thread Wedge Anchor, 1/4 x 2-1/4 in. Size, 1/4 in. diameter, 2-1/4 in. length, 1/4-20 in. thread size, 1-1/4 in. thread length, 20 thread per inch, 1/4 in. drill size, Steel material, Zinc Plated Finish, 1/2 x 3-3/4 in. bolt size

W14214 Fully Threaded Wedge Anchor, 1/4 in Dia, 2-1/4 in OAL, 1-1/4 in L Thread, Steel, Zinc Plated

MFR: LH Dottie

MFR #: W14214

UPC: 781002593027

Item #: 107810

LH DOTTIE

Wall Board Anchor, #8 screw size, Zinc material, 3/8 IN Drywall-60, 1/2 IN Drywall-68, 5/8 IN Drywall-90 lb. tension strength, 3/8 IN Drywall-120, 1/2 IN Drywall-132, 5/8 IN Drywall-200 lb. shear strength

WD8 Wall Board Anchor, #8 Screw, Zinc

MFR: LH Dottie

MFR #: WD8

UPC: 781002297765

Item #: 170488

LH DOTTIE

Full Thread Wedge Anchor, 3/8 x 3 in. Size, 3/8 in. diameter, 3 in. length, 3/8-16 in. thread size, 1-7/8 in. thread length, 16 thread per inch, 3/8 in. drill size, Steel material, Zinc Plated Finish, 1/4 x 2-1/4 in. bolt size

W38300 Fully Threaded Wedge Anchor, 3/8 in Dia, 3 in OAL, 1-7/8 in L Thread, Steel, Zinc Plated

MFR: LH Dottie

MFR #: W38300

UPC: 781002593089

Item #: 140231

LH DOTTIE

Zamac Anchor, 1/4 in. diameter, 1-1/4 in. length, 1/4 in. drill size, Flat head type, Zamac Alloy material, Carbon Steel screw material

ZA125 Anchor With Pin, 1/4 in Dia, 1-1/4 in OAL, Zamak Alloy Body Shell, Carbon Steel Pin, Flat Head

MFR: LH Dottie

MFR #: ZA125

UPC: 781002593546

Item #: 65531

LH DOTTIE

Zamac Anchor, 1/4 in. diameter, 1 in. length, 1/4 in. drill size, Flat head type, Zamac Alloy material, Carbon Steel screw material, Phillips drive type

ZAS100 Anchor With Pin and Screw, 1/4 in Dia, 1 in OAL, Zamak Alloy Body Shell, Carbon Steel Pin, Flat/Phillips Head

MFR: LH Dottie

MFR #: ZAS100

UPC: 781002593614

Item #: 167833

LH DOTTIE

Hex Head Concrete Anchor System, 1/4 in. diameter, 2-3/4 in. length, Hi-Low thread type, 3/16 x 4-1/2 in. drill size, Ceramic Coated Blue finish, Drill included, 5/16 in. bit size, Slotted drive type

14H234 4560 Concrete Anchoring Screw, 1/4 in Dia, 2-3/4 in OAL, Hex/Slotted Head Drive, Galvanized Steel

MFR: LH Dottie

MFR #: 14H234

UPC: 781002254485

Item #: 95169

LH DOTTIE

Zamac Anchor, 1/4 in. diameter, 1-1/4 in. length, 1/4 in. drill size, Flat head type, Zamac Alloy material, Carbon Steel screw material, Phillips drive type

ZAS125 Anchor With Pin and Screw, 1/4 in Dia, 1-1/4 in OAL, Zamak Alloy Body Shell, Carbon Steel Pin, Flat/Phillips Head

MFR: LH Dottie

MFR #: ZAS125

UPC: 781002593621

Item #: 170036

LH DOTTIE

Full Thread Wedge Anchor, 3/8 x 3-3/4 in. Size, 3/8 in. diameter, 3-3/4 in. length, 3/8-16 in. thread size, 2-5/8 in. thread length, 16 thread per inch, 3/8 in. drill size, Steel material, Zinc Plated Finish, 1/4 x 3-1/4 in. bolt size

W38334 Fully Threaded Wedge Anchor, 3/8 in Dia, 3-3/4 in OAL, 2-5/8 in L Thread, Steel, Zinc Plated

MFR: LH Dottie

MFR #: W38334

UPC: 781002593102

Item #: 116677

LH DOTTIE

Machine Screw Anchor, 3/8 in. Size, 3/4 in. drill size, Lead material

MA7 Medium Duty Machine Screw Anchor, 3/8 in Dia, Lead

MFR: LH Dottie

MFR #: MA7

UPC: 781002299356

Item #: 26842

LH DOTTIE

Full Thread Wedge Anchor, 3/8 x 5 in. Size, 3/8 in. diameter, 5 in. length, 3/8-16 in. thread size, 3-7/8 in. thread length, 16 thread per inch, 3/8 in. drill size, Steel material, Zinc Plated Finish, 3/8 x 2-1/4 in. bolt size

W38500 Fully Threaded Wedge Anchor, 3/8 in Dia, 5 in OAL, 3-7/8 in L Thread, Steel, Zinc Plated

MFR: LH Dottie

MFR #: W38500

UPC: 781002593119

Item #: 60244

LH DOTTIE

Tapered Anchor with Wings, 1-1/4 in. length, 1/4 in. drill size, #8, #10, #12 screw size, Plastic, Yellow

122 4370 Tapered Screw Anchor With Wing, 1-1/4 in OAL, Plastic

MFR: LH Dottie

MFR #: 122

UPC: 781002314325

Item #: 85375

LH DOTTIE

Full Thread Wedge Anchor, 1/4 x 3-1/4 in. Size, 1/4 in. diameter, 3-1/4 in. length, 1/4-20 in. thread size, 2-1/4 in. thread length, 20 thread per inch, 1/4 in. drill size, Steel material, Zinc Plated Finish, 1/2 x 4 in. bolt size

W14314 Fully Threaded Wedge Anchor, 1/4 in Dia, 3-1/4 in OAL, 2-1/4 in L Thread, Steel, Zinc Plated

MFR: LH Dottie

MFR #: W14314

UPC: 781002593041

Item #: 115930

LH DOTTIE

Straight Anchor, 1 in. length, 1/4 in. drill size, #10, #12 screw size, Plastic, Green

222 Invincibox Straight Anchor, 1 in OAL, Plastic

MFR: LH Dottie

MFR #: 222

UPC: 781002160908

Item #: 19296

LH DOTTIE

Hex Head Concrete Anchor System, 3/16 in. diameter, 1-1/4 in. length, Hi-Low thread type, 5/32 x 3-1/2 in. drill size, Ceramic Coated Blue finish, Drill included, 1/4 in. bit size, Slotted drive type

36H114 4560 Concrete Anchoring Screw, 3/16 in Dia, 1-1/4 in OAL, Hex/Slotted Head Drive, Galvanized Steel

MFR: LH Dottie

MFR #: 36H114

UPC: 781002112082

Item #: 11574

LH DOTTIE

Zamac Anchor, 1/4 in. diameter, 1 in. length, 1/4 in. drill size, Flat head type, Zamac Alloy material, Carbon Steel screw material

ZA100 Anchor With Pin, 1/4 in Dia, 1 in OAL, Zamak Alloy Body Shell, Carbon Steel Pin, Flat Head

MFR: LH Dottie

MFR #: ZA100

UPC: 781002593522

Item #: 136870

LH DOTTIE

8-10-12 Tapered Anchors with Collar ( Red )

22 Screw Anchor With Collar, 1 in OAL, Plastic

MFR: LH Dottie

MFR #: 22

UPC: 781002150909

Item #: 15203

LH DOTTIE

Zamac Anchor, 1/4 in. diameter, 1-1/2 in. length, 1/4 in. drill size, Flat head type, Zamac Alloy material, Carbon Steel screw material, Phillips drive type

ZAS150 Zamac 4495 Hammer Drive Anchor With Removable Steel Pin, 1/4 in Dia, 1-1/2 in OAL, Zamak Alloy

MFR: LH Dottie

MFR #: ZAS150

UPC: 781002593638

Item #: 170682

LH DOTTIE

1/4'' x 1-3/4'' Hex Head Concrete Screw Bolt, Case Hardened Low Carbon Steel, Zinc Plated

CSB14134 Concrete Screw Bolt, Case Hardened Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: CSB14134

UPC: 781002857983

Item #: 1485039

LH DOTTIE

Lag Shield Anchor, 1/2 in. Size, 3/4 in. diameter, 3 in. minimum embedment depth, Zamac Metal material, 2750 lb. tension strength

SLS12 Long Lag Shield, 3/4 in Dia, 1/2 in Drill, Zamac Metal

MFR: LH Dottie

MFR #: SLS12

UPC: 781002312451

Item #: 82774

LH DOTTIE

Drop in Anchor, 2 in. length, 2 in. minimum embedment depth, 1/2-13 in. thread size, 13 thread per inch, 5/8 in. drill size, Steel material, Zinc Plated Finish

DA50 4500 Drop-In Anchor, Steel, 5/8 in Drill, 2 in D Min Embedment

MFR: LH Dottie

MFR #: DA50

UPC: 781002276104

Item #: 24787

LH DOTTIE

Hexagonal Nut Sleeve Anchor, 1/4 x 1-3/8 in. Size, 1/4 in. diameter, 1-21/32 in. length, 2-1/4 in. minimum embedment depth, 1/4 in. drill size, Steel material, Zinc Plated Finish

SA14138 Sleeve Anchor, 1/4 in Dia, Steel, Hex Head

MFR: LH Dottie

MFR #: SA14138

UPC: 781002593300

Item #: 130862

CULLY

No Image Available

#8 Plastic Expander Anchor Kit, 8 x 1-1/2" Pan Head, Phillips/Slotted, Zinc Plated, 1/4" Carbide Bit

MFR: Minerallac

MFR #: 39767

UPC: 085937397676

Item #: 71406

CULLY

#10 Plastic Expander Anchor Kit, 10 x 1-1/2" Pan Head, Phillips/Slotted, Zinc Plated, 1/4" Carbide Bit

#10 Plastic Expander Anchor Kit, 10 x 1-1/2" Pan Head, Phillips/Slotted, Zinc Plated, 1/4" Carbide Bit

MFR: Minerallac

MFR #: 39768

UPC: 085937397683

Item #: 90928

LH DOTTIE

ZAS75 PC 4495 Anchor With Screw, 1/4 IN Diameter, 3/4 IN Length, Drill Size: 1/4 IN, Head Type: Phillips, Zamac Alloy, Carbon Steel Screw, For Concrete, Block, Brick And Stone

ZAS75 Anchor, 1/4 in Dia, 3/4 in OAL, Zamak Alloy Body Shell, Steel Pin, Phillips Head

MFR: LH Dottie

MFR #: ZAS75

UPC: 781002593607

Item #: 167053

LH DOTTIE

Zamac Anchor, 3/16 in. diameter, 7/8 in. length, 3/16 in. drill size, Flat head type, Zamac Alloy material, Carbon Steel screw material

ZA78 Anchor With Pin, 3/16 in Dia, 7/8 in OAL, Zamak Alloy Body Shell, Carbon Steel Pin, Flat Head

MFR: LH Dottie

MFR #: ZA78

UPC: 781002593508

Item #: 2678

LH DOTTIE

Hexagonal Nut Sleeve Anchor, 3/8 x 1-7/8 in. Size, 3/8 in. diameter, 2-3/16 in. length, 1-1/8 in. minimum embedment depth, 3/8 in. drill size, Steel material, Zinc Plated Finish

SA38178 Sleeve Anchor, 3/8 in Dia, Steel, Hex Head

MFR: LH Dottie

MFR #: SA38178

UPC: 781002593386

Item #: 144161

LH DOTTIE

Zamac Anchor, 1/4 in. diameter, 1-1/2 in. length, 1/4 in. drill size, Flat head type, Zamac Alloy material, Carbon Steel screw material

ZA150 Anchor With Pin, 1/4 in Dia, 1-1/2 in OAL, Zamak Alloy Body Shell, Carbon Steel Pin, Flat Head

MFR: LH Dottie

MFR #: ZA150

UPC: 781002593560

Item #: 135753

LH DOTTIE

Full Thread Wedge Anchor, 3/8 x 2-3/4 in. Size, 3/8 in. diameter, 2-3/4 in. length, 3/8-16 in. thread size, 1-5/8 in. thread length, 16 thread per inch, 3/8 in. drill size, Steel material, Zinc Plated Finish, 1/4 x 1-3/4 in. bolt size

W38234 Fully Threaded Wedge Anchor, 3/8 in Dia, 2-3/4 in OAL, 1-5/8 in L Thread, Steel, Zinc Plated

MFR: LH Dottie

MFR #: W38234

UPC: 781002593072

Item #: 115962

LH DOTTIE

Full Thread Wedge Anchor, 1/2 x 3-3/4 in. Size, 1/2 in. diameter, 3-3/4 in. length, 1/2-13 in. thread size, 2-3/8 in. thread length, 13 thread per inch, 1/2 in. drill size, Steel material, Zinc Plated Finish, 3/8 x 3 in. bolt size

W12334 Fully Threaded Wedge Anchor, 1/2 in Dia, 3-3/4 in OAL, 2-3/8 in L Thread, Steel, Zinc Plated

MFR: LH Dottie

MFR #: W12334

UPC: 781002593133

Item #: 117227

LH DOTTIE

3/8'' x 2-1/2'' Hex Head Concrete Screw Bolt, Case Hardened Low Carbon Steel, Zinc Plated

CSB38212 Concrete Screw Bolt, Case Hardened Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: CSB38212

UPC: 781002858010

Item #: 1485041

LH DOTTIE

Full Thread Wedge Anchor, 1/2 x 5-1/2 in. Size, 1/2 in. diameter, 5-1/2 in. length, 1/2-13 in. thread size, 4-1/8 in. thread length, 13 thread per inch, 1/2 in. drill size, Steel material, Zinc Plated Finish, 3/8 x 5 in. bolt size

W12512 Fully Threaded Wedge Anchor, 1/2 in Dia, 5-1/2 in OAL, 4-1/8 in L Thread, Steel, Zinc Plated

MFR: LH Dottie

MFR #: W12512

UPC: 781002593164

Item #: 31875

LH DOTTIE

Hex Head Concrete Anchor System, 1/4 in. diameter, 3-1/4 in. length, Hi-Low thread type, 3/16 x 5-1/2 in. drill size, Ceramic Coated Blue finish, Drill included, 5/16 in. bit size, Slotted drive type

14H314 Concrete Anchor System, 5/16 in Dia, 3-1/4 in OAL, Ceramic Blue Coated

MFR: LH Dottie

MFR #: 14H314

UPC: 781002255284

Item #: 92499

LH DOTTIE

No Image Available

CSB14214 Concrete Screw Bolt, Case Hardened Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: CSB14214

UPC: 781002857990

Item #: 1485040

LH DOTTIE

Lag Shield Anchor, 3/8 in. Size, 5/8 in. diameter, 2-1/2 in. minimum embedment depth, Zamac Metal material, 1800 lb. tension strength

SLS38 4450 Long Lag Shield Anchor, 5/8 in Dia, 3/8 in Drill, Zamak Metal

MFR: LH Dottie

MFR #: SLS38

UPC: 781002312406

Item #: 19351

LH DOTTIE

Full Thread Wedge Anchor, 1/4 x 1-3/4 in. Size, 1/4 in. diameter, 1-3/4 in. length, 1/4-20 in. thread size, 3/4 in. thread length, 20 thread per inch, 1/4 in. drill size, Steel material, Zinc Plated Finish, 1/2 x 2-3/4 in. bolt size

W14134 Fully Threaded Wedge Anchor, 1/4 in Dia, 1-3/4 in OAL, 3/4 in L Thread, Steel, Zinc Plated

MFR: LH Dottie

MFR #: W14134

UPC: 781002593003

Item #: 158098

LH DOTTIE

Full Thread Wedge Anchor, 3/8 x 2-1/4 in. Size, 3/8 in. diameter, 2-1/4 in. length, 3/8-16 in. thread size, 1-1/4 in. thread length, 16 thread per inch, 3/8 in. drill size, Steel material, Zinc Plated Finish, 1/2 x 5-1/2 in. bolt size

W38214 Fully Threaded Wedge Anchor, 3/8 in Dia, 2-1/4 in OAL, 1-1/4 in L Thread, Steel, Zinc Plated

MFR: LH Dottie

MFR #: W38214

UPC: 781002593065

Item #: 183255

LH DOTTIE

No Image Available

SA38300 Sleeve Anchor, 3/8 in Dia, Steel, Hex Head

MFR: LH Dottie

MFR #: SA38300

UPC: 781002593409

Item #: 33722

LH DOTTIE

3/8'' x 3'' Hex Head Concrete Screw Bolt, Case Hardened Low Carbon Steel, Zinc Plated

CSB38300 Concrete Screw Bolt, Case Hardened Low Carbon Steel, Zinc Plated

MFR: LH Dottie

MFR #: CSB38300

UPC: 781002858027

Item #: 1443454

LH DOTTIE

Zamac Anchor, 1/4 in. diameter, 2 in. length, 1/4 in. drill size, Flat head type, Zamac Alloy material, Carbon Steel screw material

ZA200 Anchor With Pin, 1/4 in Dia, 2 in OAL, Zamak Alloy Body Shell, Carbon Steel Pin, Flat Head

MFR: LH Dottie

MFR #: ZA200

UPC: 781002593584

Item #: 184111

LH DOTTIE

Phillips Head Concrete Anchor System, 3/16 in. diameter, 1-1/4 in. length, Hi-Low thread type, 5/32 x 3-1/2 in. drill size, Flat head type, Ceramic Coated Blue finish, Drill included, #2 bit size, Phillips drive type

36P114 Hi-Low Thread Phillips Head Concrete Anchor Screw, 3/16 in Dia, 1-1/4 in OAL, Phillips/Slotted Head Drive, Steel

MFR: LH Dottie

MFR #: 36P114

UPC: 781002112013

Item #: 126035

Minerallac Company

#10 Phillips/Slotted Pan Head Red Conical Anchor Kit, #10 x 1" (100), #10-12 (100), Includes 1/4" Carbide Drill Bit

#10 Phillips/Slotted Pan Head Red Conical Anchor Kit, #10 x 1" (100), #10-12 (100), Includes 1/4" Carbide Drill Bit

MFR: Minerallac

MFR #: 39820

UPC: 085937398208

Item #: 158588

Minerallac Company

#10 Hex Washer Head Red Conical Anchor Kit, #10 x 1" (100), #10-12 (100), Includes 1/4" Carbide Drill Bit

#10 Hex Washer Head Red Conical Anchor Kit, #10 x 1" (100), #10-12 (100), Includes 1/4" Carbide Drill Bit

MFR: Minerallac

MFR #: 39910

UPC: 085937399106

Item #: 1603230