IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Medium-Wall Heat Shrink, Thickness: 091 IN, Length: 4 (End Cap) IN, Volume Resistivity: 1014 OHM.CM For IEC 93, Dielectric Strength: Less Than 15 KV/MM IEC 243, Continuous Operating Temperature: -55 DEG CC To 110 DEG C IEC 216, Cable Range: 2/0 AWG - 500 MCM, Nominal Recoveredi.d. (max.): 0.310 IN, Expanded I.d. (min.): 0.980, Elongation At Break: ASTM D 638, Less Than 400%, Elongation Of Break After Aging: Less Than 300 PCT 150 DEG C, 168 HR
MFR: Ideal Industries
MFR #: 46-382
UPC: 783250463824
Item #: 685417
IDEAL, Heat Shrinkable Tube, Thermo-Shrink, Medium-Wall Heat Shrink, Thickness: 091 IN, Length: 4 (End Cap) IN, Volume Resistivity: 1014 OHM.CM For IEC 93, Dielectric Strength: Less Than 15 KV/MM IEC 243, Continuous Operating Temperature: -55 DEG CC To 110 DEG C IEC 216, Cable Range: 2/0 AWG - 500 MCM, Nominal Recoveredi.d. (max.): 0.310 IN, Expanded I.d. (min.): 0.980, Elongation At Break: ASTM D 638, Less Than 400%, Elongation Of Break After Aging: Less Than 300 PCT 150 DEG C, 168 HR
MFR #: 46-382
UPC: 783250463824
Item #: 685417
Availability
| Location | Available Qty |
|---|---|
| Available | Available to Order |
$15.98
each
Creates a watertight seal to protect ends of power and control cordsProtects against oxidation, ozone, UVradiation, etc.Coated with hot melt adhesive to ensure environment sealFits easily over end of cableProtect power cables up to 1000V and telecommunication cableRecommended for both open air and underground power distribution cables with PVC, lead or XLPE sheathsThermally stabilized cross-linked polylefin, coated with specially designed hot melt adhesiveUV resistant
Catalog Number
46-382
Manufacturer
Ideal Industries
Brand
Ideal
Sub Brand
Thermo-Shrink®
Country of Origin
United States
Made in USA
Yes
Special Features
Features: TS-46 irradiated cross-linked polyolefin; Adhesive liner provides complete environmental protection and insulation; Provide water-tight seal and resist corrosion, oils and chemicals;Protect cable ends during storage; Shrink temperature of 120 Degrees C;Rated for 600V / 1000V, 90 Degrees C continuous use; Creates a watertight seal to protect ends of power and control cords; Protects against oxidation, ozone, UV radiation, etc; Coated with hot melt adhesive to ensure environment seal; Fits easily over end of cable; Protect power cables up to 1000V and telecommunication cable; Recommended for both open air and underground power distribution cables with PVC, lead or XLPE sheaths; Thermally stabilized cross-linked polylelin, coated with specially designed hot melt adhesive; Cable Range: 2/0 AWG - 500 MCM; Nominal Recoveredi.d. (max.): 0.310 IN; Expanded I.d. (min.): 0.980; Elongation At Break: ASTM D 638, Less Than 400%; Elongation Of Break After Aging: Less Than 300 PCT 150 DEG C, 168 HR
Standard
RoHS
UPC
783250463824
GTIN
00783250463824
Item Type
Medium-Wall Heat Shrink
Length
4 (End Cap)
Length UOM
Inch
Thickness
091 IN