Testing and Measuring Instruments

Showing 481 - 528 of 528 Items

Sort By:

Per Page

expand_less Brand (3)

+ Show 20 More

expand_less Ways to Shop

Made in USA

Fluke

SCOPEM 2CH 500MHZ COL AMERICAS SCC

MFR: Fluke

MFR #: FLUKE-190-502/AM/S

UPC: 095969601795

Item #: 227875

Available to Order

$10208.40 each

Availability

Location	Available Qty

Fluke

SCOPEM 4CH 500MHZ COLOR AMERICAS SCC

MFR: Fluke

MFR #: FLUKE-190-504/AM/S

UPC: 095969696357

Item #: 256009

Available to Order

$10208.40 each

Availability

Location	Available Qty

Fluke

Fluke-1623-2 Basic Geo Earth Ground Tester Kit

MFR: Fluke

MFR #: FLUKE-1623-2/KIT

UPC: 095969666862

Item #: 567753

Available to Order

$7347.17 each

Availability

Location	Available Qty

Fluke

AC Current Clamp With BNC Output, Amperage Rating: 40 AMP: 0.5 - 40 AMP, 400 AMP: 5 - 400 AMP, Voltage Rating: 1000 VAC, Frequency Rating: 45 - 400 HZ, Operating Temperature: 0 - 50 DEG C, Dimensions: 5.09 IN Length X 2-3/4 IN Width X 1.18 IN Height, 2.5 MR Output Cable Length, Accuracy: 40 AMP: 2 PCT Plus 0.015 AMP, 400 AMP: 2 PCT Plus 0.04 AMP, 5 - 10 KHZ Typical Bandwidth, 32 MM Maximum Conductor Size, CSA And CE Certified, CAT IV 600 V, CAT III 1000 V

MFR: Fluke

MFR #: I400S

UPC: 095969268585

Item #: 199966

Available to Order

$576.69 each

Availability

Location	Available Qty

Fluke

Fluke 190 Series II -- 20 years of ScopeMeter Test Tool Innovation. As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness and portablitliy with 200 MHz and 2 channels. Includes C290 Hard-shell carrying case, SW90W FlukeView for ScopeMeter Test Tool and Windows Software.

MFR: Fluke

MFR #: FLUKE-190-202/AM/S

UPC: 095969601658

Item #: 143793

Available to Order

$7913.18 each

Availability

Location	Available Qty

Fluke

Fluke 190 Series II -- 20 years of ScopeMeter Test Tool Innovation. As the first two and four-channel portable scopes safety rated CAT III 1000V / CAT IV 600V, the Fluke ScopeMeter 190 Series II combines an unprecedented level of performance, ruggedness and portablitliy with 60 MHz and 2 channels. Includes C290 Hard-shell carrying case, SW90W FlukeView for ScopeMeter Test Tool and Windows Software.

MFR: Fluke

MFR #: FLUKE-190-062/AM/S

UPC: 095969601368

Item #: 134612

Available to Order

$6647.07 each

Availability

Location	Available Qty

Fluke

MFR: Fluke

MFR #: FLUKE-190-202/AM

UPC: 095969601573

Item #: 143149

Available to Order

$7280.12 each

Availability

Location	Available Qty

Fluke

Two Piece Hanger Kit, For 1730 Energy Logger

MFR: Fluke

MFR #: Fluke-1730-Hanger

UPC: 095969674652

Item #: 553246

Available to Order

$174.51 each

Availability

Location	Available Qty

Discontinued

Fluke

REFERENCE PRESSURE GAUGE G70M

MFR: Fluke

MFR #: 2700G-G70M

UPC: 095969623568

Item #: 640588

Available to Order

$2814.03 each

Availability

Location	Available Qty

Discontinued

Fluke

The fast one-handed tool for mA loop checks in Ex zones. The 707Ex is an intrinsically safe loop calibrator for use in explosion endangered areas. The Fluke 707Ex is certified in accordance with the ATEX directive (Ex II 2 G Ex ia IIC T4) in Zones 1 and 2

MFR: Fluke

MFR #: FLUKE-707EX

UPC: 095969207287

Item #: 253503

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

This clamp on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads. The Fluke 345 is more than an electric power meter. Combining the functions of a clamp meter, oscilloscope, data logger and digital power meter into one handy device, the Fluke 345 is ideal for working with variable frequency motor drives, high efficiency lighting and other loads using switching electronics. One of the leading wattage meters of the world, the multi-faceted Fluke 345 is packed with features such as a bright, color display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise and a high EMC immunity design, making the Fluke 345 power analyzer ideal for troubleshooting power quality on switching loads. The internal memory of this electric power meter enables long-term power quality logging for analysis of trends or intermittent problems. Additionally, the Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit. Besides effectively performing basic tasks like measuring wattage, the Fluke 345 power meters offer the ease of use, portability and flexibility needed to resolve most power issues in commercial, industrial and residential settings.

MFR: Fluke

MFR #: FLUKE-345

UPC: 095969344999

Item #: 200691

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Extended Fine Point Tip Adapter Set, Model: 8845A, Voltage Rating: 300 VRMS/VDC, Amperage Rating: 3 AMP, Diameter: Tip: 0.08 IN Outer, Tip Material: Stainless Steel, Nickel Plated Body, Polypropylene Insulated, UL94 V-2 Fire Retardant, Color: One Red And One Black, IEC 1010-2-0331, Category II, P2 Compliant

MFR: Fluke

MFR #: 8845A-EFPT

UPC: 095969370547

Item #: 370145

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Calculate energy loss in dollars. The Fluke 434 II Energy Analyzer is the ideal tool for energy logging. Utilizing the new Energy Loss Calculator function, the 434 II measures the fiscal cost of energy wasted due to poor power quality.

MFR: Fluke

MFR #: FLUKE-434-II

UPC: 095969615532

Item #: 125418

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Leak Detector Flashlight, UV Refrigerant Detection Method, Temperature Rating: 0 - 50 DEG C, Power Supply: AAA Battery, 395 N-M Wavelength, Includes: Detachable Key Chain Carabiner And AAA Batteries, For HVAC Technicians

MFR: Fluke

MFR #: RLD2

UPC: 095969484923

Item #: 786542

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Blank insert

MFR: Fluke

MFR #: 9142-INSZ

UPC: 095969419796

Item #: 640585

Available to Order

$711.02 each

Availability

Location	Available Qty

Discontinued

Fluke

Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert B features two wells each of 3/8, 1/4, and 3/16 inches in diameter for doing comparison calibrations.

MFR: Fluke

MFR #: 9103-B-156

UPC: 095969128605

Item #: 1121171

Available to Order

$8176.72 each

Availability

Location	Available Qty

Discontinued

Fluke

Fluke Calibration Industrial Dual-Block Thermometer Dry-Well Calibrator with Two 1/4 and Two 3/16 Inserts, Black Case, 110V, 50/60Hz.

MFR: Fluke

MFR #: 9009-B-156

UPC: 095969128421

Item #: 871581

Available to Order

$13227.13 each

Availability

Location	Available Qty

Discontinued

Fluke

Removable inserts are sized for probes with the named diameter. Use additional inserts to broaden the range of hole sizes available or to back up or replace existing inserts. This insert is designed for use with the 9103 Field Dry-Well. Insert D 9103.

MFR: Fluke

MFR #: 3103-6

UPC: 095969205573

Item #: 912644

Available to Order

$620.58 each

Availability

Location	Available Qty

Discontinued

Fluke

Need portability and extreme stability. Hart Micro-Baths have both. We invented the Micro-Bath. While many have tried to replicate it they can't use the proprietary Hart Scientific controllers, so none of them deliver performance like a Hart bath. Micro-Baths can be used anywhere for any type of sensor. It is smaller and lighter than most dry-wells, has a spill-proof lid, and easy to carry. Micro-Baths can even be transported with the fluid in them. Range: -5 degrees Celsius to 125 degrees Celsius (23 degrees Fahrenheit to 257 degrees Fahrenheit)

MFR: Fluke

MFR #: 7102-156

UPC: 095969128254

Item #: 647228

Available to Order

$13180.35 each

Availability

Location	Available Qty

Discontinued

Fluke

This dry-well is only four inches high and six inches wide, reaches temperatures as low as 10degrees Celsius, includes a NIST-traceable calibration, and is stable to plus or minus0.05degrees Celsius. The Model 9102S is excellent for dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient. It has two wells so you can use one for a reference thermometer to increase accuracy. Both wells are 1/2 inch in diameter, and each has inserts available for almost any sensor size. It also has a battery pack option that gives you approximately four hours of field use when AC power is unavailable. Block B has four holes that accept probe diameters of 3/8, 1/4, 3/16 and 1/8.

MFR: Fluke

MFR #: 9100S-B-156

UPC: 095969205603

Item #: 500672

Available to Order

$4816.53 each

Availability

Location	Available Qty

Discontinued

INSERT, E,9142,0.25(IN) REF,MISC(MM) HLS

Fluke

Insert E: 10mm, 8mm, 6mm, 1/4, 4mm, 3mm

MFR: Fluke

MFR #: 9142-INSE

UPC: 095969419765

Item #: 903896

Available to Order

$835.76 each

Availability

Location	Available Qty

Discontinued

Fluke

For IR calibrations above normal ambient, the 9132 provides a steady blackbody target up to 500degrees Celsius (932degrees Fahrenheit). With precision to plus or minus0.5degrees Celsius and stability to plus or minus0.1degrees Celsius, this new portable IR unit can certify most handheld pyrometers. Short heating and cooling times mean you won't have to wait extended periods of time to get your work done. From room temperature to 500degrees Celsius the 9132 will be stable within 30 minutes. You won't find a more compact IR calibrator. Range: 50 to 500degrees Celsius (122 to 932degrees Fahrenheit)

MFR: Fluke

MFR #: 9132-156

UPC: 095969128865

Item #: 947797

Available to Order

$10529.63 each

Availability

Location	Available Qty

Discontinued

Fluke

May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert A (variety block): 1/2, 3/8,3/16,1/8, and 1/16 holes.

MFR: Fluke

MFR #: 9140-A-156

UPC: 095969128926

Item #: 912847

Available to Order

$7113.31 each

Availability

Location	Available Qty

Discontinued

Fluke

May be used as a portable instrument or bench top temperature calibrator for calibrating thermocouple and RTD temperature probes. It is small enough to use in the field, and accurate enough to use in the lab. The temperature is accurately controlled by Harts hybrid analog/digital controller. The controller uses a precision platinum RTD as a sensor and controls the well temperature with a solid state relay (triac) driven heater. The LED front panel continuously shows the current well temperature. The temperature may be easily set with the control buttons to any desired temperature within the specified range. The instruments multiple fault protection devices insure user and instrument safety and protection. The dry-well calibrator was designed for portability, low cost, and ease of operation. Through proper use the instrument will provide continued accurate calibration of temperature sensors and devices. Insert B (comparison block): 2 3/8,2 1/4, and 2 3/16 holes.

MFR: Fluke

MFR #: 9140-B-156

UPC: 095969128940

Item #: 756371

Available to Order

$7113.31 each

Availability

Location	Available Qty

Discontinued

Fluke

Covers below-ambient temperatures as low as 25 degrees Celsius. The 9140, weighing only 2,7 kg, has a temperature range of 35 degrees Celsius to 350 degrees Celsius and reaches its maximum temperature in 12 minutes. Lightweight and very portable. Accuracy to 0.25 degrees Celsius. RS-232 and Interface-it software included. Insert A handles a full range of probe sizes with a single well of each size.

MFR: Fluke

MFR #: 9103-A-156

UPC: 095969128582

Item #: 822939

Available to Order

$8176.72 each

Availability

Location	Available Qty

Discontinued

FURNACE, 1200C TC W/3150-2, 110V 50/60HZ

Fluke

If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert A (variety block) 1/2, 3/8, 1/4, 3/16, 1/8, and 1/16 holes.

MFR: Fluke

MFR #: 9150-A-156

UPC: 095969129046

Item #: 948022

Available to Order

$18848.23 each

Availability

Location	Available Qty

Discontinued

FURNACE, 1200C TC W/3150-3, 110V 50/60HZ

Fluke

If you work with high-temperature thermocouples and youd rather test them than throw them out, but you haven't found a calibration instrument that checks them economically, now you have a solution. This calibrator delivers all the benefits to make verifying your thermocouples productive and effective. Insert B (comparison block) 2Ea 3/8, 2Ea 1/4, and 2Ea 3/16 holes.

MFR: Fluke

MFR #: 9150-B-156

UPC: 095969129060

Item #: 948025

Available to Order

$18848.23 each

Availability

Location	Available Qty

Discontinued

Fluke

If you're calibrating IR guns at cold temperatures, this is for you. With solid-state cooling technology, this new IR calibrator reaches -30degrees Celsius (22degrees Fahrenheit) in standard ambient conditions. With a conveniently located dry gas fitting on the front bezel, ice buildup on the target can be avoided. At the upper end of its range, the 9133 provides steady temperatures to 160degrees Celsius (320degrees Fahrenheit). With heating and cooling times of about 15 minutes from ambient to either extreme, this gets you to the temperature quickly and performs when it gets there. Compare your IR devices to the temperature display-its factory calibrated to be within plus or minus0.4degrees Celsius (plus or minus0.7degrees Fahrenheit). No other IR calibrators give you this level of precision in such compact packages. Whatever your temperature application, trust a Hart product to solve it. Range: -30 to 150degrees Celsius @ 23degrees Celsius ambient (-22 to 302degrees Fahrenheit @ 73degrees Fahrenheit ambient)

MFR: Fluke

MFR #: 9133-156

UPC: 095969128889

Item #: 691837

Available to Order

$14883.06 each

Availability

Location	Available Qty

Discontinued

Fluke

Comes in a yellow airtight and watertight case

MFR: Fluke

MFR #: 9009-Y-156

UPC: 095969128445

Item #: 646219

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

SureGrip Stray Voltage Adapter Test Lead Kit, Operating Temperature: -20 To 55 DEG C, 90 PCT At 0 - 35 DEG C, 70 PCT At 35 - 55 DEG C Humidity, Nominal Resistance: 3000 OHM At 25 DEG C, CAT III 1000 V, CAT IV 600 V Rated, For Use With All Modern Meters With Standard Input Spacing

MFR: Fluke

MFR #: TL225

UPC: 095969288781

Item #: 232057

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke Networks

CABLEIQ QUALIFICATION TESTER

MFR: Fluke

MFR #: CIQ-100

UPC: 754082022602

Item #: 11791

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke Networks

COPPER/FIBER TECHNICIANS KIT (CIQ-KIT + FTK1000)

MFR: Fluke

MFR #: CIQ-FTKSFP

UPC: 754082068693

Item #: 322517

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke Networks

CABLEIQ ADVANCED IT KIT

MFR: Fluke

MFR #: CIQ-KIT

UPC: 754082031963

Item #: 263093

Available to Order

Availability

Location	Available Qty

Discontinued

THRMTR,PRT,-80 TO 300C, 1/4X12 W/DATALOG

Fluke

EX Stik Thermometer, Fixed RTD, -80 to 300degrees Celsius Temperature Range, 0.25 Stem Diameter, 12 Stem Length

MFR: Fluke

MFR #: 1552A-12-DL

UPC: 095969583985

Item #: 707432

Available to Order

$1869.54 each

Availability

Location	Available Qty

Discontinued

Fluke

VT04 Series Visual IR Thermometer, Temperature Range: -10 To 250 DEG C, Accuracy: 2 PCT Temperature Measurement, Spectral Response: 6.5 - 14 UM, Data Logging: Yes, Safety Rating: CFR47: 2009 Class A. Part 15 subpart B, CE: EN 61326:2006, IEC/EN 61010-1:2010, Battery Type: (4) AA 8 HR, Dimensions: 8.3 IN Height X 3 IN Length X 2.2 IN Width

MFR: Fluke

MFR #: FLK-VT04

UPC: 095969678278

Item #: 1004630

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Detect issues instantly. Eliminate the need for multiple temperature measurements. Fluke Visual IR Thermometers combine the convenience of a spot thermometer with the visual advantage of an infrared heat map. Designed to see it all. Every Fluke Visual IR Thermometer has a built-in digital camera with an infrared heat map overlay to instantly identify the exact location of the problem.

MFR: Fluke

MFR #: FLK-VT04A

UPC: 095969725620

Item #: 390563

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

WATER DEADWEIGHT TESTER, DUAL RANGE, 700 KGF/CM2

MFR: Fluke

MFR #: P3224-KGCM2

UPC: 095969638586

Item #: 629317

Available to Order

$37203.37 each

Availability

Location	Available Qty

Discontinued

Fluke

WATER DEADWEIGHT TESTER, 10K PSI

MFR: Fluke

MFR #: P3214-PSI

UPC: 095969638517

Item #: 593913

Available to Order

$24035.65 each

Availability

Location	Available Qty

Discontinued

Fluke

REFERENCE PRESSURE GAUGE G20M

MFR: Fluke

MFR #: 2700G-G20M

UPC: 095969623544

Item #: 1069661

Available to Order

$2814.03 each

Availability

Location	Available Qty

Discontinued

Fluke

REFERENCE PRESSURE GAUGE BG2M

MFR: Fluke

MFR #: 2700G-BG2M

UPC: 095969623513

Item #: 650958

Available to Order

$2814.03 each

Availability

Location	Available Qty

Discontinued

Fluke

REFERENCE PRESSURE GAUGE BG100K

MFR: Fluke

MFR #: 2700G-BG100K

UPC: 095969623483

Item #: 650959

Available to Order

$2814.03 each

Availability

Location	Available Qty

Discontinued

Fluke

The Fluke 419D is a professional-grade laser distance meter its fast, easy to use, and fits on your tool belt. This meter will save you effort and money by reducing measurement time and errors.

MFR: Fluke

MFR #: FLUKE-419D

UPC: 095969613569

Item #: 123960

Available to Order

Availability

Location	Available Qty

Discontinued

Lutron

RadioRA 2 Wall-mount, wireless temperature sensor, 434 MHz in snow

MFR: Lutron Electronics

MFR #: LRF2-TWRB-SW

UPC: 027557800105

Item #: 258647

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Double insulated voltage probe for ScopeMeter 190 series, red with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

MFR: Fluke

MFR #: VPS220-R

UPC: 095969435833

Item #: 224255

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Double insulated voltage probe for ScopeMeter 190 series, gray with a cable length of 1.2 m and bandwidth of 200 mhz. Attenuation 100:1

MFR: Fluke

MFR #: VPS220-G

UPC: 095969435840

Item #: 224110

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Digital Precision Multimeter, Model: 8845A x, Voltage Rating: DC: 100 MILV - 1000 V, AC: 100 MILV - 750 V, Amperage Rating: DC: 200 MICAMP - 10 AMP, AC: 10 MILAMP - 10 AMP, Frequency Rating: 3 HZ - 300 KHZ, Resistance: 10 OHM - 100 MOHM, Accuracy: 0.0035 Plus 0.0005 For DC Voltage, 0.06 Plus 0.03 For AC Voltage, 0.010 Plus 0.001 For Resistance, 0.050 Plus 0.005 For DC Current, 0.10 Plus 0.04 For AC Current, 0.01 PCT Frequency, Display: VFD Dot Matrix, Dual, Temperature Rating: Operating: 0 - 55 DEG C, Storage: -40 To 70 DEG C, Diode Test: Test Current: 100 MICAMP or 1 MILAMP, Response Time: 300 Samples/S With Audible Tone, Dimensions: 3.46 IN Height X 8.56 IN Width X 11.7 IN Depth

MFR: Fluke

MFR #: 8845A120V

UPC: 095969292016

Item #: 426197

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

Precision and versatility for bench or systems applications. The Fluke 8846A 6.5 digit precision multimeter has the precision and versatility to handle your most demanding measurements, on the bench or in a system. 24 ppm, USB memory.

MFR: Fluke

MFR #: 8846A/C120V

UPC: 095969353885

Item #: 512138

Available to Order

Availability

Location	Available Qty

Discontinued

Fluke

PROBE, SECON. PRT, 100 OHM (3/16 X 9 INCH) Type P: Info-Con for 1523 or 1524

MFR: Fluke

MFR #: 5615-9-P

UPC: 095969482271

Item #: 1194562

Available to Order

$2568.09 each

Availability

Location	Available Qty