Hole Saws

Showing 529 - 568 of 568 Items

Sort By:

Per Page

expand_less Brand

+ Show 1 More

expand_less Ways to Shop

Greenlee

EXTENSION, BIT (7/16" X 18")

MFR: Greenlee

MFR #: 904H-18

UPC: 783310353560

Item #: 144619

Available to Order

$66.94 each

Availability

Location	Available Qty

Greenlee

CUTTER SET (POP)

MFR: Greenlee

MFR #: 11180

UPC: 783310111801

Item #: 226448

Available to Order

$28.79 each

Availability

Location	Available Qty

Greenlee

Carbide-Tipped Hole Cutter 2-1/2" (63.5mm). Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.

MFR: Greenlee

MFR #: 625-2-1/2

UPC: 783310383369

Item #: 249779

Available to Order

$107.27 each

Availability

Location	Available Qty

Greenlee

CARBIDE CUTTER, QUICK CHANGE, 13/16"

MFR: Greenlee

MFR #: 645-13/16

UPC: 783310056942

Item #: 200095

Available to Order

$36.67 each

Availability

Location	Available Qty

Greenlee

Quick Change Carbide Tipped Hole Cutter 1-11/16" (42.9 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a rn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

MFR: Greenlee

MFR #: 645-11/16

UPC: 783310056928

Item #: 200274

Available to Order

$36.67 each

Availability

Location	Available Qty

Quick Change Carbide Tipped Hole Cutter 1-1/2" (38.1 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

Greenlee

645-1-1/2 Quick Change 1-1/2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-1-1/2

UPC: 783310057017

Item #: 79215

Available to Order

$48.98 each

Availability

Location	Available Qty

Quick Change Carbide Tipped Hole Cutter 2-3/8" (60.3 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

Greenlee

645-2-3/8 Quick Change 2-3/8 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-2-3/8

UPC: 783310059615

Item #: 703640

Available to Order

$86.13 each

Availability

Location	Available Qty

Greenlee

Quick Change Carbide Tipped Hole Cutter 2-1/8" (54.0 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

MFR: Greenlee

MFR #: 645-2-1/8

UPC: 783310059608

Item #: 91376

Available to Order

$77.06 each

Availability

Location	Available Qty

Quick Change Carbide Tipped Hole Cutter 2-1/2" (63.5 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

Greenlee

645-2-1/2 Quick Change 2-1/2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-2-1/2

UPC: 783310057055

Item #: 145892

Available to Order

$90.16 each

Availability

Location	Available Qty

Quick Change Carbide Tipped Hole Cutter 3" (76.2 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

Greenlee

645-3 Quick Change 3 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-3

UPC: 783310057079

Item #: 107990

Available to Order

$110.47 each

Availability

Location	Available Qty

Greenlee

Carbide-Tipped Hole Cutter 1" (25.4mm). Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. Eliminates need for center punch.

MFR: Greenlee

MFR #: 625-1

UPC: 783310383277

Item #: 329958

Available to Order

$53.25 each

Availability

Location	Available Qty

Greenlee

625-2 2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 625-2

UPC: 783310383345

Item #: 131983

Available to Order

$87.60 each

Availability

Location	Available Qty

Greenlee

Multiple tungsten carbide tips for long life and smooth cutting. Cut fast, accurate, high quality holes in stainless steel, copper, aluminum, steel. Flange stop prevents over-drilling. Replaceable cobalt steel pilot drill, with split-point tip design, to improve performance and resist walking. eliminates need for center punch.

MFR: Greenlee

MFR #: 625-1-7/32

UPC: 783310383291

Item #: 138446

Available to Order

$59.05 each

Availability

Location	Available Qty

Quick Change Carbide Tipped Hole Cutter 1-7/32" (31.0 mm). Cuts stainless steel quickly and easily. Quick Change arbor allows you to change cutter heads with a simple push and a turn. Use the same arbor for different size cutting heads. Removable cutter heads available in sizes from 5/8" through 3". Flange stop prevents over-drilling. Ejector spring on all sizes above 3/4" makes removal of slug easier. Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking. Precision carbide teeth for optimum performance and durability. Minimum chuck size of 3/8".

Greenlee

645-1-7/32 Quick Change 1-7/32 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 645-1-7/32

UPC: 783310056980

Item #: 273

Available to Order

$41.59 each

Availability

Location	Available Qty

Greenlee

1.750",44.4MM CARBIDE HOLE CUTTER

MFR: Greenlee

MFR #: 625-1-3/4

UPC: 783310383338

Item #: 201385

Available to Order

$76.36 each

Availability

Location	Available Qty

Greenlee

625-1-1/2 1-1/2 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 625-1-1/2

UPC: 783310383321

Item #: 50631

Available to Order

$68.60 each

Availability

Location	Available Qty

Greenlee

CARBIDE CUTTER, QUICK CHANGE, 1-5/16"

MFR: Greenlee

MFR #: 645-1-5/16

UPC: 783310059585

Item #: 322681

Available to Order

$48.46 each

Availability

Location	Available Qty

Greenlee

CARBIDE CUTTER, QUICK CHANGE, 1-1/16"

MFR: Greenlee

MFR #: 645-1-1/16

UPC: 783310059578

Item #: 807431

Available to Order

$42.54 each

Availability

Location	Available Qty

Greenlee

625-3/4 3/4 inch Carbide Tipped Hole Cutter

MFR: Greenlee

MFR #: 625-3/4

UPC: 783310383246

Item #: 197285

Available to Order

$47.63 each

Availability

Location	Available Qty

Greenlee

Quick Change D'VersiBIT Extension System Kit. 2.25' x 5" x 21.5" (57.1mm x 127mm x 539.7mm). All the same great features as a traditional flexible drill bit , but with even more flexibility and versatility. For use when drilling between studs and joists. Can use with any type of bit with a 1/4" quick change hex on it, such as spade bits, auger bits or drill bits for increased application flexibility. Replace only the bit as it wars rather than the entire bit and shaft for lower overall cost of ownership. Quickly and easily switch from drilling to pulling with the quick change pulling grip.

MFR: Greenlee

MFR #: 921-18

UPC: 783310124139

Item #: 150886

Available to Order

$43.83 each

Availability

Location	Available Qty

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 3". Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

MFR: Greenlee

MFR #: 825-3

UPC: 783310191674

Item #: 167653

Available to Order

$18.41 each

Availability

Location	Available Qty

Greenlee

Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. Fish Pole 24 FT collapses to 50 IN x 2 1/4 IN and uses snap-lock buttons to maintain extended reach capabilities. Install suspension wires for drop ceilings.

MFR: Greenlee

MFR #: FP24

UPC: 783310104438

Item #: 140372

Available to Order

$280.88 each

Availability

Location	Available Qty

Greenlee

Designed specifically for pushing and pulling wires over long distances. Push or pull wires over suspended ceilings, under sub-floors or crawl spaces and in attics. Non-conductive, high-impact construction. Velcro strap secures pole when in collapsed position. Self-contained, no loose parts. Lightweight design to minimize fatigue. Fish Pole 18 FT collapses to 27 IN x 2 IN and uses friction-locking system. Install suspension wires for drop ceilings.

MFR: Greenlee

MFR #: FP18

UPC: 783310104421

Item #: 49991

Available to Order

$170.31 each

Availability

Location	Available Qty

Greenlee

Bit Extension, 18" with 5/16" Hex Shank. For holesaw arbors, spade bits, Nail Eater II bits, Electrician's bits and Step bits. Use for boring deeper in wood.

MFR: Greenlee

MFR #: 902-18

UPC: 783310027072

Item #: 122129

Available to Order

$47.08 each

Availability

Location	Available Qty

Greenlee

Bi-Metal Hole Saw Kit for 1/2" - 4" Conduit Sizes. Several electrician's kits available providing an assortment of the most commonly used Greenlee variable pitch hole saw sizes and arbors. High-impact, rugged plastic carrying case. Each kit includes three hole saw stops.

MFR: Greenlee

MFR #: 835

UPC: 783310275381

Item #: 110816

Available to Order

$238.20 each

Availability

Location	Available Qty

Greenlee

Recessed Light Hole Saw Blade for the 35715 6-7/8" Holesaw.

MFR: Greenlee

MFR #: 35723

UPC: 783310357230

Item #: 103170

Available to Order

$36.13 each

Availability

Location	Available Qty

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 4-1/8" (104.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

MFR: Greenlee

MFR #: 825-4-1/8

UPC: 783310191773

Item #: 13045

Available to Order

$28.91 each

Availability

Location	Available Qty

Greenlee

Quick Change Hole Saw Kit. New arbor allows for rapid mounting or removal of hole saws. Faster, easier slug removal. Drill pilot hole without saw. Eliminates the "bite"" when saw crashes into the steel. Provides better ergonomics - reduces stress on wrist, arm and hand. Eliminates obstructed view from hole saw. Only one arbor required from 7/8" to 6" (7/16" shank recommended for hole saws above 2-1/2"). Works with recessed light and carbide grit hole saw products as well. Adapters re-usable to minimize costs. Universal - works with any brand hole saw. Kit contains Bi-metal holesaws for 1/2" - 2" conduit sizes.

MFR: Greenlee

MFR #: 830Q

UPC: 783310028062

Item #: 82272

Available to Order

$155.85 each

Availability

Location	Available Qty

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 1-7/8" (47.6 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

MFR: Greenlee

MFR #: 825-1-7/8

UPC: 783310191544

Item #: 103684

Available to Order

$13.63 each

Availability

Location	Available Qty

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 2-3/4" (69.8 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

MFR: Greenlee

MFR #: 825-2-3/4

UPC: 783310191650

Item #: 144701

Available to Order

$18.01 each

Availability

Location	Available Qty

Greenlee

Bi-Metal Hole Saw, Actual Hole Size 2-1/4" (57.2 mm). Cut through steel, tin, aluminum, fiberglass, wood and plastic. Deep 1-5/8" (41.3 mm) cutting depth allows for cutting through 2" x 4" wood studs. Extra-tough bi-metal blade- we use the highest grade oftool steel to outlast competitor's blades. That beats premature saw replacement and saves you money. Steam oxide finish - no paint to gum up and slow cutting. The saw runs cooler for longer life and better performance. Extra-thick backplate minimizes vibration for smoother, easier, less tiring cutting. Made in USA.

MFR: Greenlee

MFR #: 825-2-1/4

UPC: 783310191599

Item #: 2948

Available to Order

$16.75 each

Availability

Location	Available Qty

Greenlee

Recessed Light Hole Saw Steel Toothed 4-3/8" (111mm). Industry's only interchangeable replacement bladeS. Strong durable back plate. Available in two styles - steel tooth and carbide grit. Made and designed in USA by Greenlee. Use with a power drill to cut large diameter holes for recessed lighting fixtures. Saws use Greenlee arbor 37156, purchased separately.

MFR: Greenlee

MFR #: 35712

UPC: 783310357124

Item #: 162634

Available to Order

$79.43 each

Availability

Location	Available Qty

Discontinued

Milwaukee

1/2" Superhawg w/case

MFR: Milwaukee Electric Tool

MFR #: 1680-21

UPC: 045242001989

Item #: 156057

Available to Order

Availability

Location	Available Qty

Discontinued

M18 FUEL Hole Hawg 1/2 in. Right Angle Drill - 6.0 Kit

Milwaukee

1/2 in. Right Angle Drill Kit

MFR: Milwaukee Electric Tool

MFR #: 2807-22

UPC: 045242560387

Item #: 1152724

Available to Order

Availability

Location	Available Qty

Discontinued

Milwaukee

1/2 RIGHTANGHOLEHAWG

MFR: Milwaukee Electric Tool

MFR #: 1676-6

UPC: 045242001811

Item #: 205807

Available to Order

Availability

Location	Available Qty

Discontinued

Milwaukee

1-1/4 in. HOLE DOZER Bi-Metal Hole Saw

MFR: Milwaukee Electric Tool

MFR #: 49-56-0063

UPC: 045242310692

Item #: 591938

Available to Order

Availability

Location	Available Qty

Discontinued

Locksmith's Hole Dozer Bi-Metal Hole Saw Kit (8-Piece)

Milwaukee

8 pc. locksmith hole saw kit

MFR: Milwaukee Electric Tool

MFR #: 49-22-4074

UPC: 045242310777

Item #: 823584

Available to Order

Availability

Location	Available Qty

Discontinued

M18 FUEL Hole Hawg Right Angle Drill w/QUIK-LOK - 6.0 Kit

Milwaukee

Right Angle Drill w/Quik-Lok Kit

MFR: Milwaukee Electric Tool

MFR #: 2808-22

UPC: 045242560400

Item #: 1126598

Available to Order

Availability

Location	Available Qty

Discontinued

Milwaukee

Hole Saw

MFR: Milwaukee Electric Tool

MFR #: 49-56-0073

UPC: 045242310678

Item #: 943254

Available to Order

Availability

Location	Available Qty

Discontinued

DOTTIE L H COMPANY

Telescoping Pole Tool, 1/4 in. Size, 4 ft. length

MFR: LH Dottie

MFR #: DLM12

UPC: 781002822806

Item #: 30461

Available to Order

Availability

Location	Available Qty