Product Details
The Raychem ECW-GF electronic thermostat provides accurate temperature control with integrated 30-mA ground-fault protection. The ECW-GF is housed in a NEMA 4X enclosure designed to be wall mounted or installed on a pipe with the optional Raychem FTC-PSK pipe stand kit. The thermostat includes a digital display that shows the measured temperature, set point temperature and alarm conditions (temperature sensor failure, high or low temperature and ground-fault) if detected. Alarm conditions can be indicated via a Form C dry contact connected to a building management system. An optional remote display panel, the Raychem ECW-GF-DP, is available. This remote display provides remote alarm indication and ground-fault test and reset capability.
Manuals and Documentation
Features
- Common supply for controller and heat tracing circuit
- Double-pole, mechanical relay
- Adjustable 2 to 10 deg F dead band
- 32 to 200 deg F control
- Shorted or open temperature sensor
- Thermistor 10 kOhm input
- 30 mA fixed ground fault protection
- Reset button, manual ground fault trip
- Programmable at controller - push buttons on front panel
- Four numeric display digits for parameter and error/alarm indication
- Non-volatile, restored after power loss memory
- 18-6 AWG screw rising cage clamp heating cable
- 3 LEDs 1 green, 1 red, 1 amber
- 8 position terminal block
- 0 to 90%, no condensing relative humidity
- Fiberglass reinforced polyester plastic
- Energy saving, line-sensing or ambient electronic control thermostat
- 32 B0F/0 B0C to 200 B0F/93 B0C adjustable, 100 to 277 V
- Maximum current 30 A direct switching of heating cables, 277 VAC
- Housed in NEMA 4X enclosure simple and fast to install, wall or pipe mounting
Specifications
Identifiers
| Manufacturer Part Number |
ECW-GF
|
|---|---|
| GTIN |
00715629007285
|
| UPC |
715629007285
|
|---|
General Information
| Manufacturer |
Chemelex
|
|---|---|
| Brand |
RAYCHEM
|
| Country Of Origin |
MX
|
| Warranty |
2 Years
|
|---|---|
| Standards Approvals |
UL Listed
|
| Application |
For pipe freeze protection, flow maintenance, freezer frost heave, floor heating and snow melting applications
|
Technical Information
| Amperage Rating |
30 A
|
|---|---|
| Calibration Accuracy |
+/-3 deg F
|
| Material |
Plastic
|
| Nema Rating |
NEMA 4X
|
|---|---|
| Type |
Digital
|
| Voltage Rating |
100 to 277 V AC
|