Miscellaneous

Showing 49 - 93 of 93 Items
Filters Clear Filters
expand_less Brand (3)
+ Show 119 More
expand_less Ways to Shop
expand_less Material
expand_less Finish
  • Arlington
  • O-Z/Gedney
  • VHB
Arlington
TV Bridge Kit. Comes with (2) two gang power box on top and single gang on the bottom. Comes pre wired and fully assembled. For Low voltage and bridging power from one stud bay to another.
MFR: Arlington
MFR #: TVBR21K
UPC: 018997242204
Item #: 649105
Available to Order
$102.54 each
Availability
Location Available Qty
Arlington
Kits come with two installed receptacles, ultra thin stamped steel flange, and flush-to-the-floor in-use and blank covers. Includes a low voltage keystone holder for up to 4 low voltage ports. Installs easily into our 5.5" round concrete box (FLBC5500). Cover is powder-coated light almond.
MFR: Arlington
MFR #: FLBC5570LA
UPC: 018997211750
Item #: 1324006
Available to Order
$98.86 each
Availability
Location Available Qty
Arlington
Zinc die-cast, 1/2" Knockout MC cable connector snaps quickly on to the conduit with a removable screw in spring steel clip and then snaps into knockout with external spring steel clip, no tools required. Concrete tight when taped. Comes with Insulated throat.
MFR: Arlington
MFR #: 3810900AST
UPC: 018997365101
Item #: 582170
Available to Order
$1.64
Availability
Location Available Qty
Arlington
Non-metallic 5 x 7 inch base for 1/2 inch siding that provides a smooth mounting surface for equipment and devices.
MFR: Arlington
MFR #: MB5741
UPC: 018997151711
Item #: 1319113
Available to Order
$5.76 each
Availability
Location Available Qty
VHB
3M(TM) VHB(TM) Tape 4941 Gray, 1 in x 36 yd 45.0 mil, 9 per case
MFR: 3M Electrical Products
MFR #: 4941
UPC: 021200648885
Item #: 977057
Available to Order
$184.06 each
Availability
Location Available Qty
VHB
3M(TM) VHB(TM) Tape 5952 Black, 3/4 in x 36 yd 45.0 mil, 12 per case Bulk
MFR: 3M Electrical Products
MFR #: 5952
UPC: 021200970566
Item #: 201307
Available to Order
$128.00 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type EYAM Vertical/Horizontal Sealing Fitting, Size: 3/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered MNPT X Tapered FNPT, Dimensions: 1-1/4 IN Body Diameter X 4-3/16 IN Overall Length, 1-3/8 IN Turning Radius, 1.5
MFR: O-Z/Gedney
MFR #: EYAM-75
UPC: 783126139013
Item #: 129980
Available to Order
$57.43 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type LBY 90 DEG Capped Conduit Short Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 2-3/8 IN, Trade Size: 3/4 IN, Connection: Tapered FNPT Hub, Third Party Certification: UL 34997, Hazardous Location: Class I, Division 1, 2, G
MFR: O-Z/Gedney
MFR #: LBY-75
UPC: 783126329018
Item #: 1220414
Available to Order
$67.89 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type FF 90 DEG Raintight Corner Pulling Elbow, Malleable Iron, Finish: Zinc Plated, Length: 3-1/4 IN, Trade Size: 1-1/4 IN, Connection: FNPT, 2-5/16 IN Height, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Thir
MFR: O-Z/Gedney
MFR #: FF-125
UPC: 783126152302
Item #: 144194
Available to Order
$59.68 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type KO Knockout Plug, Size: 1-1/4 IN, Steel, Finish: Zinc Plated, 1-13/16 IN Diameter, For Closing Unused Opening Or Knockout In Sheet Metal Box, Enclosure Or Cabinet
MFR: O-Z/Gedney
MFR #: KO-125S
UPC: 783126318951
Item #: 169981
Available to Order
$3.90 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type MF 90 DEG Raintight Corner Pulling Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 3-1/4 IN, Trade Size: 1-1/4 IN, Connection: FNPT X MNPSM, 2-1/8 IN Height, 11/16 IN Thread Length, Third Party Certification: UL File Numbe
MFR: O-Z/Gedney
MFR #: MF-125
UPC: 783126400601
Item #: 410767
Available to Order
$61.30 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type EYA Vertical/Horizontal Sealing Fitting, Size: 2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2-3/8 IN Body Diameter X 6-1/4 IN Overall Length, 2-3/4 IN Turning Radius, 15 OZ Sealing Compound
MFR: O-Z/Gedney
MFR #: EYA-200
UPC: 783126138108
Item #: 104784
Available to Order
$164.53 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type EYA Vertical/Horizontal Sealing Fitting, Size: 1-1/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-7/8 IN Body Diameter X 5-1/16 IN Overall Length, 2 IN Turning Radius, 6 OZ Sealing Compound
MFR: O-Z/Gedney
MFR #: EYA-125
UPC: 783126138061
Item #: 206334
Available to Order
$84.38 each
Availability
Location Available Qty
O-Z/Gedney
IMC/Rigid Conduit Elbow, Type Capped, Short, Trade Size 1-1/2 Inch, Bend Angle 90 Deg, Connection Type Female, Female, Material Malleable Iron, Finish Zinc Electroplated, Chromate, Epoxy Powder Coated, Approval UL 514B/886, CSA C22.2, Application Hazardous and Ordinary Location, Enclosure Class I Div. 1, 2, Groups B, C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II Div 1, 2, Groups E, F, G, Class III, Size 2-1/16 Inch W x 2-3/4 Inch H, Used On Rigid Conduit/IMC
MFR: O-Z/Gedney
MFR #: LBY-150
UPC: 783126329049
Item #: 361452
Available to Order
$250.65 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type EYA Vertical/Horizontal Sealing Fitting, Size: 1 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 1-3/8 IN Body Diameter X 4-5/16 IN Overall Length, 1-3/4 IN Turning Radius, 2.25 OZ Sealing Compo
MFR: O-Z/Gedney
MFR #: EYA-100
UPC: 783126138047
Item #: 93647
Available to Order
$69.43 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type CHM-T Raintight Conduit Hub, Size: 2-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Male X 2-1/2-8 Tapered FNPT, Dimensions: 3-7/8 IN Diameter X 2-5/8 IN Length, Box Wall Thickness: 21/32 IN, Third Party Certification: UL File Number 11853 For Use In Wet Locations, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, NEMA : 4, NEMA : 12, Hazardous Locations: Class I, Division 2/Class II, Division 1, 2/Class III, Division 1, 2 Per NEC 501-4(b), 501.10(b)(4), 502-4(a)(2), 503-3(a), For Rigid Conduit And IMC
MFR: O-Z/Gedney
MFR #: CHM-250T
UPC: 783126194319
Item #: 129658
Available to Order
$109.68 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type CH Space-Maker Conduit Hub, Size: 4 IN, Malleable Iron, Finish: Zinc Plated, Connection: 4-8 Female Tapered NPSM, Dimensions: 5-1/2 IN Diameter X 2-3/4 IN Length, Box Wall Thickness: 5/8 IN, Third Party Certification: UL File Number
MFR: O-Z/Gedney
MFR #: CH-400
UPC: 783126092950
Item #: 253009
Available to Order
$339.15 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type CHM Raintight Conduit Hub, Size: 3-1/2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Male X 3-1/2-8 Tapered FNPT, Dimensions: 5-1/8 IN Diameter X 3 IN Length, Box Wall Thickness: 5/8 IN, Third Party Certification: UL File Number 11853 For Use In Wet Locations, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification W-F-408E, NEMA : FB-1, NEMA : 4, NEMA : 12, Hazardous Locations: Class I, Division 2/Class II, Division 1, 2/Class III, Division 1, 2 Per NEC 501-4(b), 501.10(b)(4), 502-4(a)(2), 503-3(a), For Rigid Conduit And IMC
MFR: O-Z/Gedney
MFR #: CHM-350
UPC: 783126194081
Item #: 120628
Available to Order
$175.43 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type CH Space-Maker Conduit Hub, Size: 2-1/2 IN, Malleable Iron, Finish: Zinc Plated, Connection: 2-1/2 IN-8 Female Tapered NPSM, Dimensions: 3-3/4 IN Diameter X 2-1/2 IN Length, Box Wall Thickness: 21/32 IN, Third Party Certification: UL
MFR: O-Z/Gedney
MFR #: CH-250
UPC: 783126092806
Item #: 251785
Available to Order
$144.25 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type 17 Service Entrance Head, 1-1/4 IN Hub, Length: 3-1/8 IN, 4-7/16 IN Width, 3-1/4 IN Height, Malleable Or Ductile Iron, Phenolic Insulator, Finish: Hot Dip Or Mechanically Galvanized, Connection: Threaded, 2 X 27/64 IN, 3 X 5/8 IN In
MFR: O-Z/Gedney
MFR #: 17-125G
UPC: 783126694154
Item #: 414215
Available to Order
$100.48 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type FF 90 DEG Raintight Corner Pulling Elbow, Malleable Iron, Finish: Zinc Plated, Length: 3-3/4 IN, Trade Size: 1-1/2 IN, Connection: FNPT, 2-9/16 IN Height, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Thir
MFR: O-Z/Gedney
MFR #: FF-150
UPC: 783126152357
Item #: 627800
Available to Order
$84.83 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type LBY 90 DEG Capped Conduit Short Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 3-5/16 IN, Trade Size: 1-1/4 IN, Connection: Tapered FNPT Hub, Third Party Certification: UL 34997, Hazardous Location: Class I, Division 1,
MFR: O-Z/Gedney
MFR #: LBY-125
UPC: 783126329032
Item #: 257809
Available to Order
$131.03 each
Availability
Location Available Qty
O-Z/Gedney
Cable Support, Type Multiple Segment Plug, Body Type Tapered, Conduit Type Rigid/IMC/EMT, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 1-1/2 Inch, Cable Type Non-Armored, Number of Conductors 1 to 4 (Same Size), Size 2-5/8 Inch Dia x 2-3/8 Inch H, Material Hot Dip Galvanized Malleable/Ductile Iron, Application Indoor, Approval UL 514B, CSA C22.2, Applicable Standard NEC 300-19, With pOZi-grip R-Style Wedging Plug
MFR: O-Z/Gedney
MFR #: R-1501-1
UPC: 783126022087
Item #: 863255
Available to Order
$316.56 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type MF 90 DEG Raintight Corner Pulling Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 2-1/4 IN, Trade Size: 3/4 IN, Connection: FNPT X MNPSM, 1-1/2 IN Height, 1/2 IN Thread Length, Third Party Certification: UL File Number E-
MFR: O-Z/Gedney
MFR #: MF-075
UPC: 783126400205
Item #: 492680
Available to Order
$27.00 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type FF 90 DEG Raintight Corner Pulling Elbow, Malleable Iron, Finish: Zinc Plated, Length: 2-3/4 IN, Trade Size: 1 IN, Connection: FNPT, 1-15/16 IN Height, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third P
MFR: O-Z/Gedney
MFR #: FF-100
UPC: 783126152258
Item #: 48806
Available to Order
$44.33 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 2 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 3-5/16 IN Maximum Diameter X 1-1/2 IN Length, 11/16 IN Thread Length, Third Party Certification: UL File Number E-11853, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit
MFR: O-Z/Gedney
MFR #: 31-200T
UPC: 783126739558
Item #: 598976
Available to Order
$206.42 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type 31 Gland Compression Rigid Connector, Size: 3/4 IN, Connection: Male NPS Hub X Compression, Malleable Iron, Finish: Zinc Electroplated, Insulated Throat, Dimensions: 1-9/16 IN Maximum Diameter X 7/8 IN Length, 7/16 IN Thread Length, Third Party Certification: UL File Number E-11853, Applicable Third Party Standards: UL 514B, Federal Specification W-F-408E, NEMA : FB-1, For Threadless Rigid Conduit
MFR: O-Z/Gedney
MFR #: 31-075T
UPC: 783126739152
Item #: 966504
Available to Order
$22.57 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type CHM-T Raintight Conduit Hub, Size: 1/2, Malleable Iron, Finish: Zinc Electroplated, Connection: Male X 1/2-14 Tapered FNPT, Dimensions: 1-1/2 IN Diameter X 1-3/8 IN Length, Box Wall Thickness: 7/32 IN, Third Party Certification: UL
MFR: O-Z/Gedney
MFR #: CHM-50T
UPC: 783126194258
Item #: 160864
Available to Order
$20.65 each
Availability
Location Available Qty
O-Z/Gedney
IMC/Rigid Conduit Hub, Type Male Threaded, Throat Type Insulated, Trade Size 3-1/2 Inch, Size 5-1/8 Inch Dia x 3 Inch L, Constructional Feature Dusttight, Raintight, Watertight, Ground Type Bonding Screw, Material Zinc Plated Malleable Iron, Approval UL 514B, CSA C22.2, Used On Rigid Conduit/IMC, Applicable Standard Federal Specification W-F-408E
MFR: O-Z/Gedney
MFR #: CHM-350T
UPC: 783126194333
Item #: 200246
Available to Order
$204.93 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type CHM-T Raintight Conduit Hub, Size: 3/4, Malleable Iron, Finish: Zinc Electroplated, Connection: Male X 3/4-14 Tapered FNPT, Dimensions: 1-3/4 IN Diameter X 1-1/2 IN Length, Box Wall Thickness: 9/32 IN, Third Party Certification: UL
MFR: O-Z/Gedney
MFR #: CHM-75T
UPC: 783126194265
Item #: 130954
Available to Order
$23.30 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type 8 90 DEG Short Conduit Elbow, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 1 IN, Connection: FNPT X MNPT, Dimension A: 1-7/8 IN, 11/16 IN Thread Length, Third Party Certification: UL File Number E-34997, Hazardous Locations
MFR: O-Z/Gedney
MFR #: 8-100
UPC: 783126642407
Item #: 249844
Available to Order
$109.29 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type KO Knockout Plug, Size: 2 IN, Steel, Finish: Zinc Plated, 2-11/16 IN Diameter, For Closing Unused Opening Or Knockout In Sheet Metal Box, Enclosure Or Cabinet
MFR: O-Z/Gedney
MFR #: KO-200S
UPC: 783126319057
Item #: 1293832
Available to Order
$9.77 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type PLG Internal Recessed Threaded Insert Plug, Size: 1-1/2 IN, Copper-Free Aluminum, Connection: Threaded NPT, Body Thick: 3/4 IN, 3/4 IN Socket Size, Third Party Certification: UL File Number E-34997 Suitable For Wet Locations, UL Li
MFR: O-Z/Gedney
MFR #: PLG150RA
UPC: 783126057065
Item #: 138583
Available to Order
$15.45 each
Availability
Location Available Qty
O-Z/Gedney
Cable Support, Type 1-Piece Plug, Body Type Tapered/Knurled, Conduit Type Rigid/IMC/EMT, Voltage Rating 600 V, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 4 Inch, Cable Type Non-Armored, Number of Conductors 2 to 4 (Same Size), Size 5-5/8 Inch Dia x 3-7/8 Inch H, Material Hot Dip Galvanized Malleable/Ductile Iron, Application Indoor, Approval UL 514B, CSA C22.2, Applicable Standard NEC 300-19, With pOZi-grip S-Style Wedging Plug
MFR: O-Z/Gedney
MFR #: S-4000-1
UPC: 783126022667
Item #: 297876
Available to Order
$826.06 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type CHM-T Raintight Conduit Hub, Size: 1-1/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Male X 1-1/4-11-1/2 Tapered FNPT, Dimensions: 2-3/8 IN Diameter X 1-7/8 IN Length, Box Wall Thickness: 13/32 IN, Third Party Certi
MFR: O-Z/Gedney
MFR #: CHM-125T
UPC: 783126194289
Item #: 161544
Available to Order
$33.93 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type 7 Bushed Conduit Nipple, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 3-1/2 IN, 5-1/8 IN Outside Diameter, Connection: MNPS, 1-3/8 IN Thread Length, Flange Thickness: 3/8 IN, Third Party Certification: UL File Number E-11853, CSA 009795, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification/CID A-A-50553, ANSI/NEMA : FB-1, For Rigid Conduit Or IMC
MFR: O-Z/Gedney
MFR #: 7-350
UPC: 783126637854
Item #: 435285
Available to Order
$162.65 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type EYA-A Vertical/Horizontal Sealing Fitting, Size: 1 IN, Copper-Free Aluminum, Connection: Tapered FNPT, Dimensions: 1-39/64 IN Body Diameter X 4-3/8 IN Overall Length, 1-1/2 IN Turning Radius, 4 OZ Sealing Compound Required, 1/4 OZ
MFR: O-Z/Gedney
MFR #: EYA-100A
UPC: 783126056792
Item #: 173970
Available to Order
$81.33 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type EYM Vertical Sealing Fitting, Size: 3/4 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered MNPT X Tapered FNPT, Dimensions: 1-5/16 IN Body Diameter X 4-3/16 IN Overall Length, 2 IN Turning Radius, 1.75 OZ Sealing Com
MFR: O-Z/Gedney
MFR #: EYM-75
UPC: 783126057966
Item #: 99000
Available to Order
$58.55 each
Availability
Location Available Qty
O-Z/Gedney
Cable Support Body, Type Knurled/Tapered, Plug Type 1-Piece, Conduit Type Rigid/IMC/EMT, Voltage Rating 600 V, Conduit Position Vertical, Conductor Size 18 to 8 AWG, 6 to 1/0 AWG, 2/0 to 4/0 AWG, 4/0 AWG to 750 KCMIL (Aluminum/Copper Clad Aluminum/Copper), Conduit Size 5 Inch, Cable Type Non-Armored, Material Hot Dip Galvanized Malleable/Ductile Iron, Application Indoor, Approval UL 514B, CSA C22.2, Applicable Standard NEC 300-19
MFR: O-Z/Gedney
MFR #: S-5000-BO
UPC: 783126022681
Item #: 416616
Available to Order
$1189.37 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type EYAM Vertical/Horizontal Sealing Fitting, Size: 1 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered MNPT X Tapered FNPT, Dimensions: 1-3/8 IN Body Diameter X 4-13/16 IN Overall Length, 1-3/4 IN Turning Radius, 2.2
MFR: O-Z/Gedney
MFR #: EYAM-100
UPC: 783126139020
Item #: 1141986
Available to Order
$72.20 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type DB Drain And Breather, Size: 3/8 IN, Stainless Steel, Connection: Tapered NPT, Dimensions: 11/16 IN Maximum Diameter X 1-5/16 IN Length, Dimension A: 1-5/16 IN, Third Party Certification: UL File Number E-34997, Hazardous Locations: C
MFR: O-Z/Gedney
MFR #: DB-38
UPC: 783126110005
Item #: 891808
Available to Order
$137.73 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type EY Vertical Sealing Fitting, Size: 2 IN, Malleable Iron, Finish: Zinc Electroplated, Connection: Tapered FNPT, Dimensions: 2-3/4 IN Body Diameter X 6-1/4 IN Overall Length, 3-5/8 IN Turning Radius, 15 OZ Sealing Compound Required, 1 OZ Approximate Amount Of Fiber/Hub Required, Third Party Certification: UL File Number E-34997, UL Listed Using O-Z/Gedney EYC Sealing Compound Or Crouse-Hinds Chico Compound, UL Listed For Vertical Conduit Runs In: Class I, Division 1, 2, Groups C, D, Class I, Zone 1, 2, Groups IIA, IIB, Class II, Division 1, 2, Groups E, F, G, Class III, CSA 009795, CSA Certified sealing compound, Applicable Third Party Standards: UL 886, CSA C22.2 Number 30, NEC Articles 500-503 & 505, Military Specification: Mil-F-28675, For Rigid Conduit Or IMC
MFR: O-Z/Gedney
MFR #: EY-200
UPC: 783126137101
Item #: 329602
Available to Order
$165.75 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type MF 90 DEG Raintight Corner Pulling Elbow, Malleable Iron, Finish: Zinc Electroplated, Length: 4-5/8 IN, Trade Size: 2 IN, Connection: FNPT X MNPSM, 2-13/16 IN Height, 13/16 IN Thread Length, Third Party Certification: UL File Number
MFR: O-Z/Gedney
MFR #: MF-200
UPC: 783126401004
Item #: 184426
Available to Order
$140.95 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type KO Knockout Plug, Size: 1-1/2 IN, Steel, Finish: Zinc Plated, 2-7/32 IN Diameter, For Closing Unused Opening Or Knockout In Sheet Metal Box, Enclosure Or Cabinet
MFR: O-Z/Gedney
MFR #: KO-150S
UPC: 783126319002
Item #: 159173
Available to Order
$5.43 each
Availability
Location Available Qty
O-Z/Gedney
OZ-Gedney Type 7 Bushed Conduit Nipple, Malleable Iron, Finish: Zinc Electroplated, Trade Size: 5 IN, 6-3/8 IN Outside Diameter, Connection: MNPS, 1-1/4 IN Thread Length, Flange Thickness: 1/2 IN, Third Party Certification: UL File Number E-11853, Applicable Third Party Standards: UL 514B, CSA C22.2 No.18, Federal Specification/CID A-A-50553, ANSI/NEMA : FB-1, For Rigid Conduit Or IMC
MFR: O-Z/Gedney
MFR #: 7-500
UPC: 783126638059
Item #: 279372
Available to Order
$735.00 each
Availability
Location Available Qty

About Miscellaneous

This Node is used to load items that don't have a UNSPSC and haven't been reviewed.