LOS-CUS-1000-WH

Lutron Electronics

Lutron

LOS-CUS series

Lighting Control

Plastic

Ceiling

1000 ft2 (93 m2), 180 degree field of view

Can integrate into Lutron system or function as a stand-alone control using Lutron power pack. Any movement within the range of the sensor causes a shift in the original emitted frequency. The receiver on the sensor identifies any change in frequency as motion and either turns the lights on or keeps the lights on. Intelligent, continually adapting ultrasonic sensor technology eliminates manual sensitivity and time adjustments during installation and over the life of the product. Snap-locks to ceiling-mounted cover plate. Excellent minor motion sensitivity. Non-volatile memory: settings saved in protected memory are not lost during power outages. 500 ft2 to 2000 ft2 (46 m2 to 185 m2) coverage when mounted on an 8 ft to 12 ft (2.4 m to 3.7 m) ceiling. Afford choice of turning lights off or dimming to a preset level in the unoccupied state when integrated with a Lutron system. Provides reliable detection with high minor motion detection. The internal microprocessor analyzes the information from the ultrasonic technology and determines the optimum setting to use in order to properly cover the space. Should the room be reconfigured (e.g. new furniture), the software will adapt to continue to provide correct time out for the lights.

UL, cUL

20 to 24 VDC

027557181983

00027557181983

Ultrasonic ceiling-mount sensor

Relative humidity less than 95 percent, non-condensing. For indoor use only

32 to 104 F