Electrical Relays and Accessories

Showing 1921 - 1968 of 2500 Items
Filters
expand_less Brand
+ Show 14 More
expand_less Ways to Shop
Littelfuse
RK-310R-01 LED REMOTE KIT RED C/W LBL#1
MFR: Littelfuse
MFR #: RK-310R-01
UPC: 079458825510
Item #: 1499413
Available to Order
$366.98 each
Availability
Location Available Qty
Littelfuse
The SE-CS30 series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.
MFR: Littelfuse
MFR #: SE-CS30-8
UPC: 079458989267
Item #: 1475951
Available to Order
$6710.70 each
Availability
Location Available Qty
Littelfuse
The 777 is a fully programmable electronic overload relay designed to protect any motor drawing 2-800 full load amps (external CTs are required above 90 amps). The 777 (family of products) is for 3-phase 200-480VAC applications, with several specialized units for other voltage ranges and unique applications. Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application. Some unique applications include use with a Subtrol equipped Franklin submersible motor to detect high motor temperatures and applications where a fast linear trip is required. All of the overload relays provide unsurpassed protection by combining overload, voltage, phase loss and reversal, voltage and current unbalance, power monitoring, and underload based on current in one package. For standalone applications, the units incorporate a 3-digit LED display that is used for programming, providing real-time operational information and displaying diagnostic codes to aid in troubleshooting a fault condition. The units also feature a communications port that can be used with communication modules listed in the 777 accessories section to form a Modbus, DeviceNet Profibus, or Ethernet network. Up to 99 units can be remotely monitored and controlled from a PC, PLC, or SCADA system, and data logging through a PC with the optional Solutions software. This capability allows for a simple, cost-effective way to meet new requirements for arc-flash safety.
MFR: Littelfuse
MFR #: 777-P2
UPC: 079458991116
Item #: 1403467
Available to Order
$2495.23 each
Availability
Location Available Qty
Littelfuse
The FA and FS Series Flashers have proven their reliability through years of use on communication towers, smoke stacks, cooling towers, tall buildings, bridges and utility towers. The highest quality components are encapsulated in a rugged plastic housing with a molded-in heat transfer plate. The flash rate, ratio, and failsafe design meet FAA regulations. Zero voltage switching can increase lamp life up to ten times. The FS155-30RF & FS165-30RF include superior RF filtering circuitry for use in high RF installations, including AM hot towers. Operation: FS Series - Flasher (OFF First), FA Series - Flashers & Aux. Modules: Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2.
MFR: Littelfuse
MFR #: FS127
UPC: 079458993394
Item #: 1482444
Available to Order
$104.35 each
Availability
Location Available Qty
Littelfuse
CT 600:1 WITH FLUX COND 31MM
MFR: Littelfuse
MFR #: ELCT30-31
UPC: 079458232684
Item #: 1204731
Available to Order
$1499.68 each
Availability
Location Available Qty
Littelfuse
COMPOUND HEAT SINK 2OZ JAR
MFR: Littelfuse
MFR #: P0200-20
UPC: 079458997477
Item #: 748630
Available to Order
$113.98 each
Availability
Location Available Qty
Littelfuse
ARC-FLASH RELAY
MFR: Littelfuse
MFR #: AF0500-00
UPC: 079458845310
Item #: 1069006
Available to Order
$13407.90 each
Availability
Location Available Qty
Littelfuse
1-PHASE VOLTAGE MONITOR/ 190-2
MFR: Littelfuse
MFR #: 50R200
UPC: 079458990706
Item #: 1407332
Available to Order
$357.40 each
Availability
Location Available Qty
Littelfuse
LIQUID LEVEL CONTROL
MFR: Littelfuse
MFR #: LLC54AA
UPC: 079458996357
Item #: 1553524
Available to Order
$220.18 each
Availability
Location Available Qty
Littelfuse
LIQUID LEVEL CONTROL
MFR: Littelfuse
MFR #: LLC52BA
UPC: 079458996340
Item #: 1475434
Available to Order
$344.60 each
Availability
Location Available Qty
Littelfuse
GF-GC MON, AC/DC SUPPLY, EXT-GC
MFR: Littelfuse
MFR #: SE-134C-XGC-00
UPC: 079458809107
Item #: 228293
Available to Order
$15683.38 each
Availability
Location Available Qty
Littelfuse
3PH VM/380-480V/adj.RD/DPDT 480V Relay. The 350 is a heavy-duty voltage monitor. This product should be used when high current relays or dual contacts are required, or 480V controls are used. Since the 350 uses heavy-duty relays, it comes in fixed voltage range models rather than a dual autoranging version like the Model 250. The 350-200 has a 15A general purpose contact. The 350-400 provides a SPDT (Form C) relay rated to switch up to 600V, allowing the use of 480V controls, eliminating the need for a control power transformer to step the voltage down to 120-240V. Several DPDT (two Form C contacts) relay models are also available. The 350 microcontroller-based family of products are low cost yet highly advanced solutions to heavy-duty problems. The 350 includes advanced single LED diagnostics. Five different light patterns distinguish faults and normal operating conditions. Other options such as high voltage trip and adjustable restart delay are available.
MFR: Littelfuse
MFR #: 350-400-2-5
UPC: 079458989953
Item #: 1521030
Available to Order
$1154.20 each
Availability
Location Available Qty
Littelfuse
The 201A is a 3-phase, auto-ranging, dual-range voltage monitor that protects 190-480VAC, 50/60Hz motors regardless of size. The product provides a user selectable nominal voltage setpoint and the voltage monitor automatically selects between the 200V and 400V range. The 201A includes advanced single LED diagnostics, where color and different light patterns distinguish between faults and normal conditions.This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions. When a harmful condition is detected, the 201As output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to acceptable levels.
MFR: Littelfuse
MFR #: 201A-9
UPC: 079458990225
Item #: 433950
Available to Order
$135.73 each
Availability
Location Available Qty
Littelfuse
The 460-15-100-SLD is a seal-leak detector to sense seal failures on submersible pumps. A microcontroller-based relay monitors the shaft seal of a submersible pump motor. A resistive probe is installed in the seal cavity. If water leaks into the pump, the resistance measured by the probe decreases. When the resistance drops below the sensitivity setpoint, the unit will trip and the relay contacts will change state. Output relay logic can be reversed by removing an external jumper. The unit will automatically reset when a fault is cleared.
MFR: Littelfuse
MFR #: 460-15-100-SLD
UPC: 079458990546
Item #: 819808
Available to Order
$398.28 each
Availability
Location Available Qty
Littelfuse
The HRPS/HRIS Series combines an electromechanical relay output with microcontroller timing circuitry. It is a factory programmed module available in any 1 of 13 standard functions. It offers 12 to 240V operation in two universal ranges and factory fixed, onboard, or external adjustable time delays with a repeat accuracy of 0.5%. The output contact rating allows for direct operation of heavy loads, such as compressors, pumps, blower motors, heaters, etc. This series is ideal for OEM applications where cost is a factor. The HRPS has non-isolated SPDT relay contacts, and the HRIS has isolated SPDT relay contacts. Both offer the most popular timer functions in the industry. Operation (Interval): Upon application of input voltage, the time delay begins. The output (relay or solid state) energizes during the time delay. At the end of time delay the output de-energizes and remains de-energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.
MFR: Littelfuse
MFR #: HRPSD12HI
UPC: 079458994063
Item #: 333183
In Stock -
$382.53 each
Availability
Location Available Qty
Littelfuse
The FS300 Series of solid-state flashers were specifically designed to operate lamp loads. Their two-terminal series connection feature makes installation easy. The high immunity to line noise and transients makes the FS300 Series ideal for moving vehicle applications. All solid-state construction means reliability and long life. The FS300 Series offers a factory fixed flash rate of 75 FPM or may be ordered with a fixed, custom flash rate ranging from 60 to 150 FPM. Operation: Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2.
MFR: Littelfuse
MFR #: FS324
UPC: 079458993554
Item #: 32685
In Stock -
$248.38 each
Availability
Location Available Qty
Littelfuse
The SE-100T is a ground-fault-relay test unit designed to test the current pickup level of ground-fault protection. The tester injects current through the window of installed ground-fault current transformers to verify the operation of ground-fault monitors and relays. It is used on substations, motor control centers (MCCs), central distribution panels, switchboards, and test benches to verify relay operation. The SE-100T tests the entire ground-fault circuit including current transformers, wiring, ground-fault relay and the operation of the interrupting device. It is recommended to test every relay and its current interrupting device annually.
MFR: Littelfuse
MFR #: SE-100T
UPC: 079458987867
Item #: 1566844
Available to Order
$2863.65 each
Availability
Location Available Qty
Littelfuse
The ECS Series of single-phase AC current sensors is a universal, overcurrent or undercurrent sensing control. Its built-in toroidal sensor eliminates the inconvenience of installing a stand-alone current transformer. Includes onboard adjustments for current sensing mode, trip point, and trip delay. Detects over or undercurrent events like locked rotor, loss of load, an open heater or lamp load, or proves an operation is taking place or has ended. Operation: Input voltage must be supplied at all times for proper operation. When a fault is sensed throughout the trip delay, the output relay is energized. When the current returns to the normal run condition or zero, the output and the delay are reset. If a fault is sensed and then corrected before the trip delay is completed, the relay will not energize and the trip delay is reset to zero.
MFR: Littelfuse
MFR #: ECS41BD
UPC: 079458992458
Item #: 1503590
Available to Order
$537.73 each
Availability
Location Available Qty
Littelfuse
The LCSC10T12 is a toroidal current sensor for use with the DCSA Series current transducer.
MFR: Littelfuse
MFR #: LCSC10T12
UPC: 079458995961
Item #: 1534387
Available to Order
$266.63 each
Availability
Location Available Qty
Littelfuse
The LSR-XXX load sensors use current levels to determine feed rates, tool wear, loss of prime on pumps, mixer viscosity and all types of overload and underload conditions. They may also be used to stage pump motors, chillers and other machinery. These devices combine a current transformer (CT) with Form C (SPDT) relay contacts to switch alarm circuits, contactors or any resistive or inductive load. One simple screwdriver adjustment will calibrate the sensor for all single-phase or 3-phase applications up to 100hp.
MFR: Littelfuse
MFR #: LSR-115
UPC: 079458996661
Item #: 543443
Available to Order
$587.28 each
Availability
Location Available Qty
Littelfuse
For splitter applications. Both terminations must be present.
MFR: Littelfuse
MFR #: SE-TA12B
UPC: 079458989519
Item #: 1526753
Available to Order
$3331.78 each
Availability
Location Available Qty
Littelfuse
The ECS Series of single-phase AC current sensors is a universal, overcurrent or undercurrent sensing control. Its built-in toroidal sensor eliminates the inconvenience of installing a stand-alone current transformer. Includes onboard adjustments for current sensing mode, trip point, and trip delay. Detects over or undercurrent events like locked rotor, loss of load, an open heater or lamp load, or proves an operation is taking place or has ended. Operation: Input voltage must be supplied at all times for proper operation. When a fault is sensed throughout the trip delay, the output relay is energized. When the current returns to the normal run condition or zero, the output and the delay are reset. If a fault is sensed and then corrected before the trip delay is completed, the relay will not energize and the trip delay is reset to zero.
MFR: Littelfuse
MFR #: ECS41BC
UPC: 079458992441
Item #: 1503591
Available to Order
$537.73 each
Availability
Location Available Qty
Siemens
DC SOLENOID SYSTEM DC 24V DC OPERATION 6NO+2NC, SCREW TERMINALS CONTACTOR RELAY62E EN 50 011
MFR: Siemens
MFR #: 3TH4262-0BB4
UPC: 754554245638
Item #: 821364
Available to Order
$767.12 each
Availability
Location Available Qty
Siemens
Contactor relay, 2NO+2NC, AC 220v 50HZ, 240v 60HZ, size s00, screw terminal
MFR: Siemens
MFR #: 3RH21221AP60
UPC: 662643903386
Item #: 1173227
Available to Order
$172.86 each
Availability
Location Available Qty
Siemens
Contactor relay, 2NO+2NC, DC 125V, size s00, screw terminal
MFR: Siemens
MFR #: 3RH21221BG40
UPC: 662643903430
Item #: 611488
Available to Order
$221.91 each
Availability
Location Available Qty
Siemens
Plug-in Relay, Premium LED, Mechanical Flag 11-pin Octal Base 3PDT, 10A, 120VACUses Socket 3TX7144-1E3 or 3TX7144-4E3
MFR: Siemens
MFR #: 3TX7112-1NF13
UPC: 754554759784
Item #: 447705
Available to Order
$75.96 each
Availability
Location Available Qty
Siemens
Timing Relay,Timer,SIMIREL Conversion type = Analog Function = 8 Function Time Range = 0.05s-100h,1CO Cntrl Voltage=24VUC/100-127VAC Screw DIN Mounting, Width = 45mm
MFR: Siemens
MFR #: 3RP2005-1AQ30
UPC: 754554842691
Item #: 242318
Available to Order
$299.07 each
Availability
Location Available Qty
Siemens
Plug-in Relay, Premium LED, Mechanical Flag 5-pin Square Base SPDT, 15A, 120VACUses Socket 3TX7144-4E7
MFR: Siemens
MFR #: 3TX7110-5JF13
UPC: 754554759845
Item #: 805880
Available to Order
$42.84 each
Availability
Location Available Qty
Littelfuse
The KRDB Series is a compact time delay relay measuring only 2 in. (50.8 mm) square. Its microcontroller timing circuit provides excellent repeat accuracy and stability. Encapsulation protects against shock, vibration, and humidity. The KRDB Series is a cost effective approach for OEM applications that require small size, isolation, reliability, and long life. Operation (Delay-on-Break): Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output relay energizes. The time delay begins when the initiate switch is opened. The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.
MFR: Littelfuse
MFR #: KRDB424
UPC: 079458994629
Item #: 1202509
Available to Order
$280.38 each
Availability
Location Available Qty
Littelfuse
The KRDB Series is a compact time delay relay measuring only 2 in. (50.8 mm) square. Its microcontroller timing circuit provides excellent repeat accuracy and stability. Encapsulation protects against shock, vibration, and humidity. The KRDB Series is a cost effective approach for OEM applications that require small size, isolation, reliability, and long life. Operation (Delay-on-Break): Input voltage must be applied before and during timing. Upon closure of the initiate switch, the output relay energizes. The time delay begins when the initiate switch is opened. The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.
MFR: Littelfuse
MFR #: KRDB115M
UPC: 079458994513
Item #: 1305639
Available to Order
$280.38 each
Availability
Location Available Qty
Littelfuse
The 233P is a single-phase pump monitor designed to protect single-phase pumps from dry-well, dead-head, jammed impeller, rapid cycle, overvoltage and undervoltage conditions. The 233P protects 230 volt, 2 or 3 wire, 1/3 to 3hp pumps. A calibration adjustment allows the 233P to be calibrated to your specific pumping applications, thereby reducing the possibility of false or nuisance tripping. A proprietary microcontroller based voltage, power factor and current-sensing circuit constantly monitors for power fluctuations, overcurrent and underload conditions. When an abnormality, such as loss of suction, is detected, the 233P deactivates its output relay and directly disconnects the pump motor. The relay then begins its user-selectable Restart Delay (dry-well recovery) timer. When the timer expires or power is removed and reapplied, the relay reactivates its output relay and allows the pump to turn back on. An infrared LED communicates directly with a hand-held diagnostic tool called the Informer (sold separately).
MFR: Littelfuse
MFR #: 233P-1.5-ENCL
UPC: 079458990348
Item #: 1029249
Available to Order
$939.93 each
Availability
Location Available Qty
Littelfuse
The TSD2 Series is designed for more demanding commercial and industrial applications where small size and accurate performance are required. The factory calibration for fixed time delays is within 1% of the target time delay. The repeat accuracy, under stable conditions, is 0.1% of the time delay. The TSD Series is rated to operate over an extended temperature range. Time delays of 0.1 seconds to 100 hours are available. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry. Operation (Interval): Upon application of input voltage, the time delay begins. The output is energized during the time delay. At the end of the time delay, the output de-energizes and remains de-energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.
MFR: Littelfuse
MFR #: TDS120AL
UPC: 079458999891
Item #: 1340233
Available to Order
$374.85 each
Availability
Location Available Qty
Littelfuse
The 460 is a 3-phase voltage monitor that protects 190-480VAC or 475-600V, 50/60Hz motors regardless of size. The product provides a user selectable nominal voltage setpoint and the voltage monitor automatically senses line voltage. This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions such as low, high, and unbalanced voltage, loss of any phase, and phase reversal. When a harmful condition is detected, the 460 output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level for a specified amount of time (restart delay). The trip and restart delays prevent nuisance tripping due to rapidly fluctuating power line conditions. All 460 models feature adjustable 1-30 second trip delay, 1-500 second restart delay, 2-8% voltage unbalance trip point, and one form C contact except where noted.
MFR: Littelfuse
MFR #: 460-VBM
UPC: 079458990645
Item #: 1012979
Available to Order
$443.15 each
Availability
Location Available Qty
Littelfuse
The TDB Series combines accurate digital circuitry with isolated, 10A, DPDT or SPDT contacts in an 8 or 11-pin plug-in package. The TDB Series features DIP switch selectable time delays ranging from 0.1-10,230 seconds in three ranges. The TDB Series is the product of choice for custom control panel and OEM designers. Operation (Delay-on-Break): Input voltage must be applied to the input before and during timing. Upon closure of the initiate switch, the output relay is energized. The time delay begins when the initiate switch is opened (trailing edge triggered). The output remains energized during timing. At the end of the time delay, the output de-energizes. The output will energize if the initiate switch is closed when input voltage is applied. Reset: Reclosing the initiate switch during timing resets the time delay. Loss of input voltage resets the time delay and output.
MFR: Littelfuse
MFR #: TDB120ALD
UPC: 079458999471
Item #: 858653
Available to Order
$527.23 each
Availability
Location Available Qty
Littelfuse
The SE-CS30 series is a sensitive nickel-core current transformer used with Littelfuse relays to detect low levels of earth-leakage current.
MFR: Littelfuse
MFR #: SE-CS30-26
UPC: 079458989205
Item #: 1390088
Available to Order
$1886.13 each
Availability
Location Available Qty
Littelfuse
The LSR-0 is a self-powered load sensor intended for use as a proof relay. It is used to verify that current is flowing as intended. It has a guaranteed 15A pull-in current and 2.5A drop-out current. Proof relays are typically used to interlock fans, compressors, motors, heating elements and other devices. The LSR-0 is self-powered, that is, it draws its power from the wire being monitored so it does not require separate control power wiring.
MFR: Littelfuse
MFR #: LSR-0
UPC: 079458996654
Item #: 891266
Available to Order
$336.35 each
Availability
Location Available Qty
Littelfuse
The 777/ 77C is a fully programmable electronic overload relay designed to protect any motor drawing 2-800 full load amps (external CTs are required above 90 amps). The 777-HVR-SP and 77C (family of products) are for single-phase 100-240VAC applications. Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application. All of the overload relays provide unsurpassed protection by combining overload, underload, and voltage in one package. For standalone applications, the units incorporate a 3-digit LED display that is used for programming, providing real-time operational information and displaying diagnostic codes to aid in troubleshooting a fault condition. The units also feature a communications port that can be used with communication modules listed in the 777 accessories section to form a Modbus, DeviceNet, Profibus, or Ethernet network. Up to 99 units can be remotely monitored and controlled from a PC, PLC, or SCADA system, and data logging through a PC with the optional Solutions software. This capability allows for a simple, cost-effective way to meet new requirements for arc-flash safety.
MFR: Littelfuse
MFR #: 77C
UPC: 079458991192
Item #: 1261620
Available to Order
$1475.13 each
Availability
Location Available Qty
Littelfuse
Used On Systems Up To 1 kV.
MFR: Littelfuse
MFR #: INFORMER
UPC: 079458994216
Item #: 1029250
Available to Order
$817.75 each
Availability
Location Available Qty
Littelfuse
The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation of either load for continuous operation. LEDs indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN rail mounted with an accessory socket. Operation: Alternating: When the rotary switch is in the alternate position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position A to lock Load A or position B to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate. Note: Input voltage must be applied at all times for proper alternation. The use of a solid-state control switch for S1 may not initiate alternation correctly. S1 voltage must be from the same supply as the units input voltage (see connection diagrams on datasheet). Loss of input voltage resets the unit; Load A becomes the lead load for the next operation. Duplexing (Cross Wired): Duplexing models operate the same as alternating relays and when both the Control (S1) and Lag Load (S2) Switches are closed, Load A and Load B energize simultaneously. The DPDT 8-pin, cross-wired option, allows extra system load capacity through simultaneous operation of both motors when needed. Relay contacts are not isolated.
MFR: Littelfuse
MFR #: ARP43S
UPC: 079458991475
Item #: 729753
Available to Order
$399.40 each
Availability
Location Available Qty
Littelfuse
The ISS-102 is a two-channel, intrinsically-safe switch designed for multiple uses including a pump-up/pump-down (latching) controller or two-channel switch. Two LEDs indicate the state of the intrinsically-safe inputs and output relays and user-selectable options are available including a variable resistance threshold for float inputs. The ISS-102 enclosure is surface or DIN rail mountable. -LC Each input channel is active when the corresponding switch is closed. When the lag input (CH2) is activated, the output closes. Applying latching logic, the output contact remains closed until the lead (CH1) and the lag (CH2) inputs are deactivated. Sensitivity is fixed at 100kOhms with a debounce time delay of 2 seconds. -DCS This dual-channel switch has a debounce delay feature of 0.5 seconds. Resistance probes or switches can be used on its inputs. Two LEDs illuminate the output state of either form A relay. Sensitivity is fixed at 100kOhms with a debounce time delay of 0.5 seconds. -MC By selecting the proper functionality through the dip switches, you can define a pump-up or pump-down, single or dual channel non-latching switch. The sensitivity adjustment (4.7k-100kOhms) allows you to define the input impedance at which the output relays (one form A & one form C) will change state, with a debounce time delay of 0.5 or 2 seconds.
MFR: Littelfuse
MFR #: ISS-102ACI-MC
UPC: 079458994278
Item #: 1371367
Available to Order
$1063.63 each
Availability
Location Available Qty
Littelfuse
Used On Systems Up To 5 kV.
MFR: Littelfuse
MFR #: ER-5KV
UPC: 079458977936
Item #: 1311635
Available to Order
$7249.43 each
Availability
Location Available Qty
Littelfuse
The FS300 Series of solid-state flashers were specifically designed to operate lamp loads. Their two-terminal series connection feature makes installation easy. The high immunity to line noise and transients makes the FS300 Series ideal for moving vehicle applications. All solid-state construction means reliability and long life. The FS300 Series offers a factory fixed flash rate of 75 FPM or may be ordered with a fixed, custom flash rate ranging from 60 to 150 FPM. Operation: Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed. Reset: Removing input voltage resets the output and the sequence to T2.
MFR: Littelfuse
MFR #: FS312
UPC: 079458993547
Item #: 789423
Available to Order
$250.30 each
Availability
Location Available Qty
Littelfuse
The ECS Series of single-phase AC current sensors is a universal, overcurrent or undercurrent sensing control. Its built-in toroidal sensor eliminates the inconvenience of installing a stand-alone current transformer. Includes onboard adjustments for current sensing mode, trip point, and trip delay. Detects over or undercurrent events like locked rotor, loss of load, an open heater or lamp load, or proves an operation is taking place or has ended. Operation: Input voltage must be supplied at all times for proper operation. When a fault is sensed throughout the trip delay, the output relay is energized. When the current returns to the normal run condition or zero, the output and the delay are reset. If a fault is sensed and then corrected before the trip delay is completed, the relay will not energize and the trip delay is reset to zero.
MFR: Littelfuse
MFR #: ECSL61AH
UPC: 079458992762
Item #: 1090804
Available to Order
$552.85 each
Availability
Location Available Qty
Littelfuse
The PCR Series of photo control is a combination of precision electronic circuitry, electromechanical output, and unique molded plastic housing. Designed and built to meet the demands of the most rigorous requirement of tower and obstruction lighting control, each unit is factory calibrated to meet FAA and FCC specifications. Electronic circuit, output contactor, and terminal block are all contained within front plastic housing. Edge support molded into the bottom edge of housing allows easy wiring of new and existing installations. Available with or without cast aluminum junction box. Operation: When the amount of light sensed falls below the actuation level for energization, the output relay energizes. Conversely, when the amount rises above the actuation level for de-energization, the output relay de-energizes.
MFR: Littelfuse
MFR #: PCR11
UPC: 079458997750
Item #: 1366356
Available to Order
$1637.60 each
Availability
Location Available Qty
Littelfuse
The 460-100-SP is used on 95-120VAC, 50*/60Hz single-phase motors and the 190-240VAC, 50*/60Hz single-phase motors to protect them from damaging high and low voltage conditions. An adjustment knob allows the user to set a 1-500 second restart delay. The variable restart delay is also a power-up delay and can be utilized to stagger-start motors on the same system. A unique microcontroller-based, voltage-sensing circuit constantly monitors the voltage to detect harmful power line conditions. When a harmful condition is detected, the relays output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level and a specified amount of time has elapsed (restart delay). The trip delay prevents nuisance tripping due to rapidly fluctuating power line conditions.
MFR: Littelfuse
MFR #: 460-200-SP
UPC: 079458990553
Item #: 878263
Available to Order
$443.15 each
Availability
Location Available Qty
Littelfuse
The TSD2 Series is designed for more demanding commercial and industrial applications where small size and accurate performance are required. The factory calibration for fixed time delays is within 1% of the target time delay. The repeat accuracy, under stable conditions, is 0.1% of the time delay. The TSD Series is rated to operate over an extended temperature range. Time delays of 0.1 seconds to 100 hours are available. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry. Operation (Interval): Upon application of input voltage, the time delay begins. The output is energized during the time delay. At the end of the time delay, the output de-energizes and remains de-energized until input voltage is removed. Reset: Removing input voltage resets the time delay and output.
MFR: Littelfuse
MFR #: TSD24145S
UPC: 079458020526
Item #: 866239
Available to Order
$268.95 each
Availability
Location Available Qty
Littelfuse
The 460 is a 3-phase voltage monitor that protects 190-480VAC or 475-600V, 50/60Hz motors regardless of size. The product provides a user selectable nominal voltage setpoint and the voltage monitor automatically senses line voltage. This unique microcontroller-based voltage and phase-sensing device constantly monitors the 3-phase voltages to detect harmful power line conditions such as low, high, and unbalanced voltage, loss of any phase, and phase reversal. When a harmful condition is detected, the 460 output relay is deactivated after a specified trip delay. The output relay reactivates after power line conditions return to an acceptable level for a specified amount of time (restart delay). The trip and restart delays prevent nuisance tripping due to rapidly fluctuating power line conditions. All 460 models feature adjustable 1-30 second trip delay, 1-500 second restart delay, 2-8% voltage unbalance trip point, and one form C contact except where noted.
MFR: Littelfuse
MFR #: 460-L
UPC: 079458990607
Item #: 1148856
Available to Order
$399.83 each
Availability
Location Available Qty
Littelfuse
3Ph Vm/380-480V/Adj.Vub,Td,Rd/2X480V Rly
MFR: Littelfuse
MFR #: 355-400-5
UPC: 079458989915
Item #: 876387
Available to Order
$1156.08 each
Availability
Location Available Qty