Safety switch, Telemecanique Safety switches XCS, metal XCSE, 2NC+1 NO slow break, 2entries tapped 1/2" NPT 110/120 V

MFR: Telemecanique Sensors
MFR #: XCSE7533
UPC: 785901729372
Item #: 165390

Safety switch, Telemecanique Safety switches XCS, metal XCSE, 2NC+1 NO slow break, 2entries tapped 1/2" NPT 110/120 V

MFR #: XCSE7533
UPC: 785901729372
Item #: 165390
Availability
Location Available Qty
Available Available to Order
$974.30 each

This product is part of the XCS range, an offer of safety switches. The limit switch is a device that converts a mechanical motion into an electrical control signal. It has 2 normally closed + 1 normally opened, slow break contacts, normally closed contact with positive opening operation. It is a switch with a rated operational current of 1.5A at 240V AC, 3A at 120V AC, 0.27A at 250V DC, 0.55 at 125V DC and a conventional enclosed thermal current of 6A. It is designed to operate in hazardous environments. It is furnished with screw clamp terminals for electrical connection and 2 cable entry tapped for 1/2inch NPT cable gland. The electromagnet interlocking on energization and unlocking on de-energization of solenoid. It offers long mechanical durability which is about 1 million operating cycles. It is an IP67 rated product. The key operated turret head limit switch has a rectangular metal body which is made of Zamak. Its dimensions are 98mm (Width) x 44mm (Depth) x 146mm (Height) and weighs 1.14kg. It is intended as far as safety is concerned all dangerous machines in all sectors are involved. Such as packaging, handling, robotics, machine tools, presses, automotive sector. This product is certified by CSA and UL. It meets CSA C22.2 No 14, EN/IEC 60947-5-1, EN/IEC 60204-1, EN/ISO 12100, EN 1088/ISO 14119 and UL 508 standards. It offers protection of operators by stopping the machine when the actuator attached to the machine guard is withdrawn from the head of the switch. Safety switches for the protection of operators, by controlling the safe opening and interlocking of guards and covers in your installations.

Catalog Number
XCSE7533
Manufacturer
Telemecanique Sensors
Brand
Telemecanique
Sub Brand
XCSE
Warranty Description
Contractual Warranty:18 months
Country of Origin
France
Made in USA
No
Action
Slow-break, break before make
Actuator
KEY
Amperage Rating
6
Application
KEY OPERATED TURRET HEAD
Connection
Terminal 1 x 0.5...2 x 1.5 mm² with or without cable end
Contact Configuration
2 NC + 1 NO
Enclosure
NEMA 4/4X/12 - IP67
Number of Poles
3
Operating Cycles
10 CYC/MN FOR MAXIMUM DURABILITY
Special Features
for guard open/guard closed and locked 2 LEDs (green or orange);Locking on energisation and unlocking on de-energisation of solenoid;Overvoltage protection signalling circuit
Standard
10 GN 11 MS IEC 60068-2-27,5 GN 10-500 HZ)IEC 60068-2-6,EN/IEC 60204-1-EN 1088/ISO 14119-EN/IEC 60947-5-1-CSA C22.2 NO 14-UL 508-EN/ISO 12100,IP67 EN/IEC 60529 AND EN/IEC 60947-5-1,UL-CSA,CLASS I EN/IEC 61140
UPC
785901729372
GTIN
03389110720389
Item Type
Safety switch
Size
1.73
Environmental Conditions
WATER TIGHT, DUST TIGHT AND CORROSION RESISTANT (INDOOR/OUTDOOR)
Operating Temperature
-25-40 A Degrees C
Voltage Rating
110/120 V - 20...10 %