Safety limit switch, Telemecanique Safety switches XCS, XCSM, metal, steel plunger, 2 NC + 1 NO, cable 5 m

MFR: Telemecanique Sensors
MFR #: XCSM3910L5
Item #: 805620

Safety limit switch, Telemecanique Safety switches XCS, XCSM, metal, steel plunger, 2 NC + 1 NO, cable 5 m

MFR #: XCSM3910L5
Item #: 805620
Availability
Location Available Qty
Available Available to Order
$185.93 each

This product is part of the XCS range, an offer of safety switches. The limit switch is a device that converts a mechanical motion into an electrical control signal. It has 2 normally closed + 1 normally opened, snap action contacts, normally closed contact with positive opening operation. It is a switch with a rated operational current of 1.5A at 240V AC, 0.1 at 250V DC. V It is furnished with a 5m pre-cabled (7 x 0.5mm) for electrical connection. It supports minimum actuation speed of 0.01m/min and maximum actuation speed 0.5m/s. It offers long mechanical durability which is about 10 million operating cycles. It is an IP66, IP67, IP68 rated product. This plunger head limit switch has a fixed type body which is made of Zamak. Its dimensions are 30mm (Width) x 16mm (Depth) x 60mm (Height) and weighs 0.165kg. It is intended as far as safety is concerned all dangerous machines in all sectors are involved. Such as packaging, handling, robotics, machine tools, presses, automotive sector. This product is certified by CUL, CSA and UL. It meets CSA C22.2 No 14, EN/IEC 60204-1, EN/IEC 60947-5-1, EN 1088 and UL 508 standards. It offers protection of operators by stopping the machine when the actuator attached to the machine guard is withdrawn from the head of the switch. Safety switches for the protection of operators, by controlling the safe opening and interlocking of guards and covers in your installations.

Catalog Number
XCSM3910L5
Manufacturer
Telemecanique Sensors
Brand
Telemecanique
Sub Brand
XCSM
Warranty Description
Contractual Warranty:18 months
Country of Origin
Unknown
Made in USA
No
Action
On end approach;Snap action
Actuator
Metal end plunger
Application
PLUNGER HEAD
Connection
Pre-cabled
Contact Configuration
1 NC + 1 NC + 1 NO
Mounting
By The Body
Special Features
Plastic protective cover, secured by 5-lobe socket head safety screw
Standard
25 GN 18 MS IEC 60068-2-27,5 GN 10-500 HZ)IEC 60068-2-6,CSA C22.2 NO 14-EN/IEC 60947-5-1-EN/IEC 60204-1-UL 508-EN 1088,CSA-UL,IK06 EN 50102,IP66 IEC 60529-IP67 IEC 60529-IP68 IEC 60529,CLASS I NF C 20-030-CLASS I EN/IEC 61140
GTIN
03389110244069
Item Type
Safety limit switch
Size
0.63
Operating Temperature
-25-70 A Degrees C