Limit switch, L100/300, 600 V 12amp type l +options

MFR: Telemecanique Sensors
MFR #: L300WNCS2M34
UPC: 785901714569
Item #: 1379317

Limit switch, L100/300, 600 V 12amp type l +options

MFR #: L300WNCS2M34
UPC: 785901714569
Item #: 1379317
Availability
Location Available Qty
Available Available to Order
$552.59 each

This product is part of the NEMA Limit Switches range, an offer of limit switches. The limit switch is a device that converts a mechanical motion into an electrical control signal. It has 2 normally closed, DPST-NC-DB (double pole, single throw, double break) form YY, snap action contacts. It is a limit switch with a conventional enclosed thermal current of 20A. It is furnished with screw clamp terminals for electrical connection. Limit switch has one 1/2 inch 14 NPT conduit entry. The spring return mechanism without operating lever supports lateral approach and switch actuation in CW and CCW position, from left or right. It is an IP67 and NEMA 1/2/4/12/13 rated product. This rotary head limit switch has a fixed type body which is made of cast aluminum with corrosion resistant grey painted finish. Its dimensions are 2.25inch (Width) x 2.03inch (Depth) x 4.95inch (Height) and weighs 1.5lb. This limit switch is suitable for material working, packaging, materials handling, conveying, food and beverage, oil, gas, crane, hoisting, mill, foundry, mining and mineral construction. The foundry switch for used in foundries or mills where the applications described above are required and where falling foundry sand or similar material could build up and jam the operating mechanism. The shaft has a dust boot and extends from the switch case, preventing sand build up around the shaft. The device can withstand hot falling sand up to 300F (149C). The L100/300 mill and foundry for severe duty fixed sequences 59mm housing, available in 2-pole or 3-pole configurations. This switch is for use in foundries or mills where falling foundry sand or similar material could build up and jam the operating mechanism.

Manuals and Documentation
Catalog Number
L300WNCS2M34
Manufacturer
Telemecanique Sensors
Brand
Telemecanique
Sub Brand
L300;L100
Warranty Description
Contractual Warranty:18 months
Country of Origin
Czech Republic
Made in USA
No
Action
From left or right;CW and CCW;Lateral approach;Snap action
Actuator
spring return without operating lever
Amperage Rating
20
Application
Foundry switch
Connection
Screw-clamp terminals AWG 22...AWG 12
Contact Configuration
Form YY;2 NC
Contact Rating
NEMA A600/P600
Enclosure
NEMA 1 NEMA TYPE 250-NEMA 2 NEMA TYPE 250-NEMA 4 NEMA TYPE 250-NEMA 12 NEMA TYPE 250-NEMA 13 NEMA TYPE 250
Mounting
By The Body
Number of Poles
2
Special Features
FIXED,NEUTRAL POSITION
Standard
10 GN 10-55 HZ)IEC 60068-2-6,30 GN 9 MS IEC 60068-2-27,IP67 IEC 60529,CLASS 0 IEC 61140
UPC
785901714569
GTIN
00785901714569
Item Type
Limit switch
Size
2.03
Operating Temperature
-10-185 A Degrees F
Voltage Rating
600V